Doug's Headers / Angled Spark Plugs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toddtheodd · 03-05-2010, 06:40 AM

Anybody running these headers on their 350?
With angled spark plugs?

SummitRacing
dougthorleyheaders

It says they fit my 72 c10 350, and that they fit angled spark plug heads, but I want to make sure before I spend THAT much money.

So if anybody here is using these, with angled plug heads, please let me know how they fit, and how you like them.

Thank you,

Todd

**bigsnookmaster** · 03-05-2010, 08:35 PM

Don't know about Doug's, but my Hooker Super Comps work fine with them. You might want to call them direct and ask them, they've been around awhile and would probably give you good info. Good luck

toddtheodd · 03-06-2010, 09:26 AM

I'm using the Hooker Comps right now (the only difference is that they are uncoated), and I'm having to take the headers off the driver's side to change the number 5 plug... not to mention that the #5 plug wire rests on the #7's pipe. I've figured out how to NOT burst the plug wire into flames, but I am still having to change that plug wire about once every 2 weeks due to burning it up.

03-05-2010, 06:40 AM	#1
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Doug's Headers / Angled Spark Plugs Anybody running these headers on their 350? With angled spark plugs? SummitRacing dougthorleyheaders It says they fit my 72 c10 350, and that they fit angled spark plug heads, but I want to make sure before I spend THAT much money. So if anybody here is using these, with angled plug heads, please let me know how they fit, and how you like them. Thank you, Todd __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY???

03-05-2010, 08:35 PM	#2
bigsnookmaster Senior Member Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,270	Re: Doug's Headers / Angled Spark Plugs Don't know about Doug's, but my Hooker Super Comps work fine with them. You might want to call them direct and ask them, they've been around awhile and would probably give you good info. Good luck __________________ greg http://community.webshots.com/user/68406Stepside

03-06-2010, 09:26 AM	#3
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Re: Doug's Headers / Angled Spark Plugs I'm using the Hooker Comps right now (the only difference is that they are uncoated), and I'm having to take the headers off the driver's side to change the number 5 plug... not to mention that the #5 plug wire rests on the #7's pipe. I've figured out how to NOT burst the plug wire into flames, but I am still having to change that plug wire about once every 2 weeks due to burning it up. __________________ "The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.