Roch Carb Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

capev86 · 03-10-2010, 10:42 PM

i have an '84 q-jet off a 350cid burb that i am rebuilding for my 72 burb. i am stuffing it full of Edelbrock parts and bits from Cliff's High Performance like bronze sleeves for the throttle shafts. also have bronze renew paint from eastwood. it will be going on the stock 307 with an edelbrock performer intake (idle-5500 rpm range) and i also want to run the '84 air box that takes a 4" tall air cleaner element. eventually i will swap my 406sbc in and the stock 350 tune worked fine on it....so nothing crazy in terms of jet size, etc is planned.

03-10-2010, 10:42 PM	#6
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: Roch Carb Question i have an '84 q-jet off a 350cid burb that i am rebuilding for my 72 burb. i am stuffing it full of Edelbrock parts and bits from Cliff's High Performance like bronze sleeves for the throttle shafts. also have bronze renew paint from eastwood. it will be going on the stock 307 with an edelbrock performer intake (idle-5500 rpm range) and i also want to run the '84 air box that takes a 4" tall air cleaner element. eventually i will swap my 406sbc in and the stock 350 tune worked fine on it....so nothing crazy in terms of jet size, etc is planned.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.