Closing out in CT - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FrameoffResto5 · 05-09-2003, 06:03 AM

I have a bunch of parts for sale. The large ones would have to be picked up in CT.

67-longbed Custom Camper 3/4 ton frame w/original split rims. It was sandblasted. painted with POR 15, then 3 coats of Eastwood chassis black. Power steering is included. EVERYTHING on this frame is brand new, front end, brakes, brake lines, shocks, heavy duty coil springs, it has the driveshaft and comes with a complete setup for power disc brakes. (power booster, 8 lug spindles, calipers, proportioning valve, front end parts to match 71 discs, etc. Has original Eaton 457 rearend w/ limited slip differential. Also has extra inverted leaf spring. Seriously heavy duty! Will also include brand new chrome step bumper to replace "okay" one on on the frame. Must come to CT to purchase. Over $3000 into it, will take $500 OBO..
71-Dana 8 lug rearend for 3/4 ton, $50
67-68 Custom made fibreglass hood, new-$100. OBO
Step bumper w/o frame, new $100, OBO.
69-72 brand new in box tan repro steering wheel. $50.00
18-Circuit Painless wiring harness, brand new in box, paid 400 plus, sell for 200, OBO.
67 original fenders in good shape $25 each, have custom camper emblems.
71-72 radiator support, decent-$25
71-hood, very good $50.00
Lots of power steering boxes $50 ea, OBO
cross rails for wood fleetside bed brand new, make offer.
72 turbo 350 chevy truck tranny, about 50 mi on 1000 buck rebuild-$300 firm
Other stuff-brand new windshields, small back windows, door glass, alternators, PS pumps (a few), FREE aluminum cap off 71 short fleetside-decent shape.
Sanderson shorty headers for Chevy V-8, cost $ 465.00, BRAND NEW, sell for 250.00.
Hooker coated regular size v8 chevy headers, factory coated, cost 450, sell for 150, had to dent to fit past frame, as my engine was big!
***5 brand new with labels still on-BF goodrich radial TA, no raised white letter, size:295-50-16. Cost 600, sell for 350, OBO.
Other smaller stuff for cheap, visors, headlights, new 67-68 headlight bezels ans tail light trim, etc.
Will ship smaller stuff, hoods, windshields, frame, etc. must come to Wolcott, CT. to pick up. Worth the ride! Contact at ejbluesboy@adelphia.net. I AM MOVING, EVERYTHING MUST GO! Thanks!

ZOOMY · 05-09-2003, 06:19 AM

I'll take the new tan steering wheel and tan sunvisors if you have them. Also tan seat belts. I'll take black seatbelts too if you have them. How about an aluminum sliding rear window ? ....Zoomy

ZOOMY · 05-09-2003, 06:34 AM

If that new step bumper is chrome, I'll take that tooif you will ship it. All of this is shipped to 53932. .....Zoomy

Woody · 05-09-2003, 07:14 AM

I'd like to have the headlight bezels. Let me know how much.

Woody

FrameoffResto5 · 05-09-2003, 07:32 AM

Quote:

Originally posted by Woody
I'd like to have the headlight bezels. Let me know how much.

Woody

Woody,
The headlight bezels are brand new, I'll give them to you for $25, they cost me around 90!
Ed
What is your address?

Woody · 05-09-2003, 08:50 AM

Ed,

Sent you a PM.

Woody

Tuck · 05-09-2003, 09:06 AM

Do you have any of the chrome strips that the door panels fit into for a 70?

superchevy · 05-09-2003, 11:11 AM

Sent you an email on that Painless harness.
SC

Yellow Cheyenne · 05-09-2003, 01:15 PM

Do you have info on the sanderson headers and are they considered shippable?

Thanks,

Randy

HotRod929 · 05-09-2003, 01:21 PM

I only need two 295/50/16 tires. Would you be willing to only sell two? If so how much ? Thanks

HotROd

mcmlxix · 05-09-2003, 10:11 PM

18-Circuit Painless wiring harness, brand new in box, paid 400 plus, sell for 200, OBO.

Sent you an emial this morning but I was at work and cant get to the email till Monday. Let me know about the painless at relfstrom@hotmail.com instead
Thanks
Rich

fast67chevy2002 · 05-09-2003, 10:26 PM

Do you have pics of the 67 fenders? If so, please pm, thanks. fast67

**Ironhorse** · 05-09-2003, 10:38 PM

Do you have any 71/72 style front bumper guards? Looking for nice driver quality. Thanks.

LeRoy · 05-10-2003, 01:46 AM

Are the hookers for a SB or BB. And by coated do you mean Ceramic?

FrameoffResto5 · 05-10-2003, 03:38 AM

Quote:

Originally posted by LeRoy
Are the hookers for a SB or BB. And by coated do you mean Ceramic?

The headers are ceramic coated, for a chevy smallblock.
Ed

FrameoffResto5 · 05-10-2003, 03:40 AM

Quote:

Originally posted by fast67chevy2002
Do you have pics of the 67 fenders? If so, please pm, thanks. fast67

I don't have any pictures of the fenders.

FrameoffResto5 · 05-10-2003, 03:41 AM

Quote:

Originally posted by Yellow Cheyenne
Do you have info on the sanderson headers and are they considered shippable?

Thanks,

Randy

The headers are definitely shippable. They are shorty block huggers. They are ceramic coated.

alta-aj · 05-10-2003, 02:32 PM

PM Sent

JesseB · 05-10-2003, 03:35 PM

I'll take the wiring kit if the others fall through.

cdowns · 05-12-2003, 05:32 PM

sent you an email and 2 PM's friday NO REPLY??????

cdowns · 05-12-2003, 05:32 PM

sent you an email and 2 PM's friday NO REPLY??????

**ScottH** · 05-12-2003, 10:03 PM

Any pics on the fiberglass hood? Thanks.

FrameoffResto5 · 05-13-2003, 12:17 AM

Quote:

Originally posted by FrameoffResto5

I may have some piocs of the fenders, if not I'll get some to you by the end of the week.
Ed
I don't have any pictures of the fenders.

Woody · 05-13-2003, 07:04 AM

Ed,

I sent you a PM (private message) about the headlight bezels. Havn't heard back. I'm going to be out of town for the next 5 days so I'll be out of touch with the board. Try to get back with me today before 3pm Eastern time if possible. Thanks!

05-09-2003, 06:03 AM	#1
FrameoffResto5 Registered User Join Date: May 2003 Location: Connecticut Posts: 22	Closing out in CT I have a bunch of parts for sale. The large ones would have to be picked up in CT. 67-longbed Custom Camper 3/4 ton frame w/original split rims. It was sandblasted. painted with POR 15, then 3 coats of Eastwood chassis black. Power steering is included. EVERYTHING on this frame is brand new, front end, brakes, brake lines, shocks, heavy duty coil springs, it has the driveshaft and comes with a complete setup for power disc brakes. (power booster, 8 lug spindles, calipers, proportioning valve, front end parts to match 71 discs, etc. Has original Eaton 457 rearend w/ limited slip differential. Also has extra inverted leaf spring. Seriously heavy duty! Will also include brand new chrome step bumper to replace "okay" one on on the frame. Must come to CT to purchase. Over $3000 into it, will take $500 OBO.. 71-Dana 8 lug rearend for 3/4 ton, $50 67-68 Custom made fibreglass hood, new-$100. OBO Step bumper w/o frame, new $100, OBO. 69-72 brand new in box tan repro steering wheel. $50.00 18-Circuit Painless wiring harness, brand new in box, paid 400 plus, sell for 200, OBO. 67 original fenders in good shape $25 each, have custom camper emblems. 71-72 radiator support, decent-$25 71-hood, very good $50.00 Lots of power steering boxes $50 ea, OBO cross rails for wood fleetside bed brand new, make offer. 72 turbo 350 chevy truck tranny, about 50 mi on 1000 buck rebuild-$300 firm Other stuff-brand new windshields, small back windows, door glass, alternators, PS pumps (a few), FREE aluminum cap off 71 short fleetside-decent shape. Sanderson shorty headers for Chevy V-8, cost $ 465.00, BRAND NEW, sell for 250.00. Hooker coated regular size v8 chevy headers, factory coated, cost 450, sell for 150, had to dent to fit past frame, as my engine was big! ***5 brand new with labels still on-BF goodrich radial TA, no raised white letter, size:295-50-16. Cost 600, sell for 350, OBO. Other smaller stuff for cheap, visors, headlights, new 67-68 headlight bezels ans tail light trim, etc. Will ship smaller stuff, hoods, windshields, frame, etc. must come to Wolcott, CT. to pick up. Worth the ride! Contact at ejbluesboy@adelphia.net. I AM MOVING, EVERYTHING MUST GO! Thanks!

05-09-2003, 06:19 AM	#2
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	parts I'll take the new tan steering wheel and tan sunvisors if you have them. Also tan seat belts. I'll take black seatbelts too if you have them. How about an aluminum sliding rear window ? ....Zoomy

05-09-2003, 06:34 AM	#3
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	bumper If that new step bumper is chrome, I'll take that tooif you will ship it. All of this is shipped to 53932. .....Zoomy

05-09-2003, 11:11 AM	#8
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Sent you an email on that Painless harness. SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-09-2003, 01:15 PM	#9
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	Do you have info on the sanderson headers and are they considered shippable? Thanks, Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

05-09-2003, 07:14 AM	#4
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	I'd like to have the headlight bezels. Let me know how much. Woody

05-09-2003, 08:50 AM	#6
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Ed, Sent you a PM. Woody

05-09-2003, 09:06 AM	#7
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	Do you have any of the chrome strips that the door panels fit into for a 70?

05-09-2003, 01:21 PM	#10
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	I only need two 295/50/16 tires. Would you be willing to only sell two? If so how much ? Thanks HotROd __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

05-09-2003, 10:11 PM	#11
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Closing out in CT 18-Circuit Painless wiring harness, brand new in box, paid 400 plus, sell for 200, OBO. Sent you an emial this morning but I was at work and cant get to the email till Monday. Let me know about the painless at relfstrom@hotmail.com instead Thanks Rich __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

05-09-2003, 10:26 PM	#12
fast67chevy2002 Dad's little helper Join Date: Apr 2003 Location: Helena, MT Posts: 194	Do you have pics of the 67 fenders? If so, please pm, thanks. fast67

05-09-2003, 10:38 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,301	Do you have any 71/72 style front bumper guards? Looking for nice driver quality. Thanks. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-10-2003, 01:46 AM	#14
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Are the hookers for a SB or BB. And by coated do you mean Ceramic? __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

05-10-2003, 02:32 PM	#18
alta-aj Registered User Join Date: Aug 2001 Location: Qualicum Beach, B.C>, Canada Posts: 117	Frameoff, sent you a PM PM Sent

05-10-2003, 03:35 PM	#19
JesseB Registered User Join Date: Mar 2003 Location: San Antonio, Texas Posts: 17	Painless wiring kit I'll take the wiring kit if the others fall through.



Register or Log In To remove these advertisements.

05-12-2003, 05:32 PM	#20
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	sent you an email and 2 PM's friday NO REPLY?????? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-12-2003, 10:03 PM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Any pics on the fiberglass hood? Thanks.

05-13-2003, 07:04 AM	#24
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Ed, I sent you a PM (private message) about the headlight bezels. Havn't heard back. I'm going to be out of town for the next 5 days so I'll be out of touch with the board. Try to get back with me today before 3pm Eastern time if possible. Thanks!

Register or Log In To remove these advertisements.