|
04-14-2010, 11:19 PM
|
#1 |
|
Registered User
Join Date: Mar 2010
Location: Edinburg,tx
Posts: 18
|
rear end pinion yoke
can anyone tell me the difference in the pinion yoke a 12bolt and 8.5 10 bolt rear end. Im having trouble finding the right u joint, also what did the 67 c10 come with stock as far as rear ends? thanks everyone
|
|
|
|
04-15-2010, 02:31 PM
|
#2 | |
|
Account Suspended
Join Date: Jan 2007
Location: Tucson
Posts: 2,183
|
Re: rear end pinion yoke
Quote:
Both the 8.5 in 10 bolt (car only) and the stock 8.875 inch 1/2 ton truck 12 bolt came with a 1310 series pinion yoke. Can't say what the PO of your diffs might have changed and I do not have the sizes for the 4wd or 3/4 ton trucks. The neat thing is the heavier 1330 and 1350 yokes and the 1310 yoke are splined the same so almost any driveline shop can get you the parts to change from one to the other. Joint Width Cap Diameter 1310 3.219 1.062 1330 3.625 1.062 1350 3.625 1.188 Last edited by Fitz; 04-15-2010 at 02:31 PM. |
|
|
|
|
|
04-15-2010, 03:04 PM
|
#3 |
|
Senior Member
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,525
|
Re: rear end pinion yoke
I put a 1350 pinion yoke in my rearend when I rebuilt it.
|
|
|
|
|
04-15-2010, 11:24 PM
|
#4 |
|
Registered User
Join Date: Mar 2010
Location: Edinburg,tx
Posts: 18
|
Re: rear end pinion yoke
thanks for the help guys, i took the rear end off and went over to freight liner and their drive shaft guy helped me out. What I need was a 1310/3r u joint. everything is back on, now just gotta fab something up for the shift linkage. again thanks guys
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
