|
04-21-2010, 04:48 PM
|
#1 |
|
Registered User
 Join Date: Apr 2010
Location: Cape Coral, FL
Posts: 3
|
engine stumbles
 Hello to all, I have a little bit of a problem.I installed a camshaftIntake Exhaust Advertised Duration 262° 272° Duration @ .050" 204° 214° Valve Lift w/ 1.5 Rocker Arms 0.420 0.442 Valve Lift @ Cam 0.280 0.295 Max Lift Angle 107° 117° Lobe Separation 112° Cam Timing @ .050" - Opens -5° ATDC 44° BBDC Cam Timing @ .050" - Closes 29° ABDC -10° BTDC adjusted the lifter to spec. and now it has a stumble off idle and 1/4 pedal.I have a Holley 600 and it run good before the cam installation. It runs great when I open it up.Can anyone help me.This driving me crazy 
|
|
|
|
04-22-2010, 11:05 PM
|
#2 |
|
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
|
Re: engine stumbles
Welcome to the site from Big Sandy, West Tennessee. You might want to post your question in the engine section. I'm sure someone can help you out.
__________________
Ron (Mr Round Tuit)  Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
