Dropmember ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snoopy · 04-22-2010, 08:21 AM

What is the recommended front wheel width and back spacing for trucks with a dropmember?

SCOTI · 04-22-2010, 08:48 AM

An 8-8.5" wheel w/5".00 would work well.

PBFAB.COM · 04-22-2010, 12:57 PM

What diameter wheel and tire combo do you plan on running?

nastyc10 · 04-22-2010, 05:00 PM

I'm running 20x8.5" with 4.5" backspacing. works fine for me. no rubbing with 70lbs of air which is a little less than I use at ride height. Some guys go with a little more backspacing.

GVizzle · 04-22-2010, 08:58 PM

I'm running a 20X8.5 with a 5.25BS in the Front.

snoopy · 04-22-2010, 09:20 PM

Quote:

Originally Posted by porterbuilt

What diameter wheel and tire combo do you plan on running?

It's going to be a 26" rim. I don't know the rim width or the tire size yet, but I do know the overall height will be 31-1/4".

mullit · 04-22-2010, 10:02 PM

how about a 265 35 22 on a 22 by 9 inch wheel? or may be a 305 40 22 which i could get a real sweet price on tires, on the 22 by 9's on a 90 burb

SCOTI · 04-22-2010, 10:20 PM

Quote:

Originally Posted by snoopy

It's going to be a 26" rim.... the overall height will be 31-1/4".

duceducenine · 04-23-2010, 11:57 AM

can anyone tell me the track width with stock style a arms?

edflores · 04-23-2010, 12:34 PM

What size tire would that be?
I think ill be at that size with some rubber band 24's so im most likely going with 22 in front to be safe

SCOTI · 04-23-2010, 11:15 PM

Quote:

Originally Posted by duceducenine

can anyone tell me the track width with stock style a arms?

I recall seeing 64.5" front disc brake track width. Pre-71 trucks were 62" rear width; post-71 were 64-ish (wheel mounting surface to wheel mounting surface).

duceducenine · 04-24-2010, 04:06 AM

Quote:

Originally Posted by SCOTI

I recall seeing 64.5" front disc brake track width. Pre-71 trucks were 62" rear width; post-71 were 64-ish (wheel mounting surface to wheel mounting surface).

is that stock? or drop member track?.....?
reasoning i want to sub frame a 57 with 73.....

SCOTI · 04-24-2010, 09:25 AM

Quote:

Originally Posted by duceducenine

is that stock? or drop member track?.....?
reasoning i want to sub frame a 57 with 73.....

That's stock track width..... DM track width would be 62" from memory.

04-22-2010, 08:21 AM	#1
snoopy Registered User Join Date: Jun 2009 Location: Goose Creek, South Carolina Posts: 219	Dropmember ? What is the recommended front wheel width and back spacing for trucks with a dropmember?

04-22-2010, 08:48 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Dropmember ? An 8-8.5" wheel w/5".00 would work well. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-22-2010, 12:57 PM	#3
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Dropmember ? What diameter wheel and tire combo do you plan on running? __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

04-22-2010, 05:00 PM	#4
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Dropmember ? I'm running 20x8.5" with 4.5" backspacing. works fine for me. no rubbing with 70lbs of air which is a little less than I use at ride height. Some guys go with a little more backspacing.

04-22-2010, 08:58 PM	#5
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: Dropmember ? I'm running a 20X8.5 with a 5.25BS in the Front.

04-22-2010, 10:02 PM	#7
mullit Registered User Join Date: Jan 2007 Location: connecticut Posts: 127	Re: Dropmember ? how about a 265 35 22 on a 22 by 9 inch wheel? or may be a 305 40 22 which i could get a real sweet price on tires, on the 22 by 9's on a 90 burb

04-23-2010, 11:57 AM	#9
duceducenine Registered User Join Date: Nov 2006 Location: el sobrante CA 94803 Posts: 284	Re: Dropmember ? can anyone tell me the track width with stock style a arms?

04-23-2010, 12:34 PM	#10
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: Dropmember ? What size tire would that be? I think ill be at that size with some rubber band 24's so im most likely going with 22 in front to be safe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.