|
04-29-2010, 06:21 PM
|
#1 |
|
Registered User
Join Date: Apr 2010
Location: Riesel, TX
Posts: 3
|
Will it bolt up?
Hey all,
I have a '58 Chevy Viking 60 with a '54 235 engine. After the compression test I have found that my engine has very little: 95,105,105,100,80,95! So what to do?! I either plan to rebuild the 235 or replace it with a 350. I have a 350 in my '76 chevy 1/2 ton that has only 25K. My question is will the 350 bolt up to my bellhousing in the Viking? Thanks for all your help! -Welder
__________________
1958 Chevy Viking 60 Leland Oil Field Bed Tulsa PTO winch 235 L6 |
|
|
|
04-29-2010, 11:48 PM
|
#2 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: Will it bolt up?
You will need a V8 bell. They are still around on ebay and craigslist
|
|
|
|
|
04-30-2010, 02:22 PM
|
#3 |
|
Registered User
Join Date: Sep 2006
Location: Shelley Idaho
Posts: 876
|
Re: Will it bolt up?
V8 Iron Bell not Aluminum. The bottom two bolts go through the bell and thread into the trans on the iron bell just like your 235 bell does, on the aluminum the bolts go through the trans and thread into the bell.
__________________
1970 Nova 327/T5 (my 1st car) 1971 K-20 350/350/205 (winter DD) 1953 GMC Suburban 1968 Chevy Bel Air 1976 Chev C-10 1972 Skylark (suncoupe) 1 of 3943 made Last edited by sweet70beast; 04-30-2010 at 02:25 PM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
