Please tell me if this fits? Oil spin on adapter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jess66chevy · 05-08-2010, 02:15 PM

So I bought this from Summit.

http://www.summitracing.com/parts/SES-3-60-08-900/

It is a spin on oil filter adapter. It doesnt come with a filter. So today I went to AutoZone and while I was getting a filter that fit the threads to the adapter in my picture, the manager stuck his nose in my business and told me that this will not work. He said that there is "no way" this will work because there is no way for oil to come out. I told him originally there was a "containaster" oil filter in my 66. Then he told me "well there has to be a line where oil comes out" (on the canister) and I told him there wasnt. Anyway, now this guy has be askin' you guys. So who has done this and will it work??????? It is supposed to! Here are the pics.

scooterskoolkustoms · 05-08-2010, 02:17 PM

It will work ,tell the manger to stick to just selling parts.I just put one on my 87 350

jess66chevy · 05-08-2010, 02:25 PM

Hey Scooterskoolkustoms,
Did your 87 have a "canister" oil filter?

andyh1956 · 05-08-2010, 02:56 PM

that is not an adapter to put a spin on filter where a canister was. that is the filter by-pass assy that bolts to the block of an engine that already uses a spin on filter. go to napa & buy the kit. when you remove your filter assy the will be a by-pass valve similar to that one in there in the block. it will be re-used under the adapter when you install it on your block. the adapter will look like a round flat bowl that has the nipple on it & a flat surface for your filter gasket to bear upon. the manager was trying to help, he just didn't know what you really needed.
andy

andyh1956 · 05-08-2010, 03:01 PM

forgot to say the adapter at napa will be in the belknap catalog.
andy

jess66chevy · 05-08-2010, 03:26 PM

I think I found the correct part! Thanks Andy. I was a little bit confused myself. Take a look, where does the gasket go?

jess66chevy · 05-08-2010, 03:27 PM

I think this is the part from NAPA

http://www.napaonline.com/Search/Det...61_0212684213#

scooterskoolkustoms · 05-08-2010, 04:07 PM

That is the part u need,I had a bypass on my truck for an oil cooler that was leaking.I removed it and installed the part you have in your hand.

andyh1956 · 05-09-2010, 02:10 AM

when you install your kit the new longer bolts will go thru the adapter, thru the by-pass & into the block. the seal for the old canister will go between the block & adapter & should be a felt or rubber seal between the by-pass & adapter. the nipple will loctite into the adapter. if you install the adapter without the by-pass under it when you crank the engine cold the oil can't all go thru the filter & it will blow the filter gasket out between adapter & gasket. don't ask how i know. hey, i was only 15 at the time. instructions? i don't need no stinking instructions!
andy

Winola73 · 05-09-2010, 12:58 PM

Also make sure the nipple in the center the filter spins on to is secure. I had one come loose on my '62 Impala SS and back out. I didn't detect it and right after an oil change the filter came off going down the highway with the nipple still in the filter. Got it shut down before I lost oil pressure but another couple seconds and it would have been real ugly.

05-08-2010, 02:15 PM	#1
jess66chevy Registered User Join Date: Jul 2009 Location: glendale, az Posts: 192	Please tell me if this fits? Oil spin on adapter So I bought this from Summit. http://www.summitracing.com/parts/SES-3-60-08-900/ It is a spin on oil filter adapter. It doesnt come with a filter. So today I went to AutoZone and while I was getting a filter that fit the threads to the adapter in my picture, the manager stuck his nose in my business and told me that this will not work. He said that there is "no way" this will work because there is no way for oil to come out. I told him originally there was a "containaster" oil filter in my 66. Then he told me "well there has to be a line where oil comes out" (on the canister) and I told him there wasnt. Anyway, now this guy has be askin' you guys. So who has done this and will it work??????? It is supposed to! Here are the pics. Attached Images

05-08-2010, 02:17 PM	#2
scooterskoolkustoms Registered User Join Date: Feb 2010 Location: so cal Posts: 436	Re: Please tell me if this fits? Oil spin on adapter It will work ,tell the manger to stick to just selling parts.I just put one on my 87 350 __________________ big old burb in primer.lot of work to do.

05-08-2010, 02:25 PM	#3
jess66chevy Registered User Join Date: Jul 2009 Location: glendale, az Posts: 192	Re: Please tell me if this fits? Oil spin on adapter Hey Scooterskoolkustoms, Did your 87 have a "canister" oil filter?

05-08-2010, 02:56 PM	#4
andyh1956 Registered User Join Date: Mar 2010 Location: thomastown mississippi Posts: 1,261	Re: Please tell me if this fits? Oil spin on adapter that is not an adapter to put a spin on filter where a canister was. that is the filter by-pass assy that bolts to the block of an engine that already uses a spin on filter. go to napa & buy the kit. when you remove your filter assy the will be a by-pass valve similar to that one in there in the block. it will be re-used under the adapter when you install it on your block. the adapter will look like a round flat bowl that has the nipple on it & a flat surface for your filter gasket to bear upon. the manager was trying to help, he just didn't know what you really needed. andy

05-08-2010, 03:01 PM	#5
andyh1956 Registered User Join Date: Mar 2010 Location: thomastown mississippi Posts: 1,261	Re: Please tell me if this fits? Oil spin on adapter forgot to say the adapter at napa will be in the belknap catalog. andy

05-08-2010, 03:26 PM	#6
jess66chevy Registered User Join Date: Jul 2009 Location: glendale, az Posts: 192	Re: Please tell me if this fits? Oil spin on adapter I think I found the correct part! Thanks Andy. I was a little bit confused myself. Take a look, where does the gasket go?

05-08-2010, 03:27 PM	#7
jess66chevy Registered User Join Date: Jul 2009 Location: glendale, az Posts: 192	Re: Please tell me if this fits? Oil spin on adapter I think this is the part from NAPA http://www.napaonline.com/Search/Det...61_0212684213#

05-08-2010, 04:07 PM	#8
scooterskoolkustoms Registered User Join Date: Feb 2010 Location: so cal Posts: 436	Re: Please tell me if this fits? Oil spin on adapter That is the part u need,I had a bypass on my truck for an oil cooler that was leaking.I removed it and installed the part you have in your hand. __________________ big old burb in primer.lot of work to do.

05-09-2010, 02:10 AM	#9
andyh1956 Registered User Join Date: Mar 2010 Location: thomastown mississippi Posts: 1,261	Re: Please tell me if this fits? Oil spin on adapter when you install your kit the new longer bolts will go thru the adapter, thru the by-pass & into the block. the seal for the old canister will go between the block & adapter & should be a felt or rubber seal between the by-pass & adapter. the nipple will loctite into the adapter. if you install the adapter without the by-pass under it when you crank the engine cold the oil can't all go thru the filter & it will blow the filter gasket out between adapter & gasket. don't ask how i know. hey, i was only 15 at the time. instructions? i don't need no stinking instructions! andy

05-09-2010, 12:58 PM	#10
Winola73 Registered User Join Date: Jan 2007 Location: Midwest Posts: 262	Re: Please tell me if this fits? Oil spin on adapter Also make sure the nipple in the center the filter spins on to is secure. I had one come loose on my '62 Impala SS and back out. I didn't detect it and right after an oil change the filter came off going down the highway with the nipple still in the filter. Got it shut down before I lost oil pressure but another couple seconds and it would have been real ugly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.