FL Blazer - drivers-side bedside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 04-19-2010, 09:43 AM

Looking for a Blazer ~ drivers side bedside, nice condition. Will consider shipping if its a west coast part. Perfer east coast, I could pick up in the near future if someone is willing to hold after payment.

I'll be in Arkansas in July and August.

Let me know, Thanks David

pound41 · 04-19-2010, 12:09 PM

A few weeks back Did you see the blazer complete back section tub and the front cowl windshield frame. Two seperate auctions It was a guy in FLA both parts on Ebay They looked pretty good to me from the pics. I thought about going after them but too far from FLA to VA. I don't think they sold

*67/72junkie* · 04-19-2010, 01:11 PM

I have very nice rust free blazer side.Has 1 small quarter size ding on rear corner.I also have new stud welder so I can pull the ding out.$350 if interested I can take pics .

**Hart_Rod** · 04-19-2010, 05:23 PM

Hey David, how about a whole 2WD blazer project? The tub is nearly rust free....

.

http://67-72chevytrucks.com/vboard/s...d.php?t=390636

**D.PASSMORE** · 04-19-2010, 08:00 PM

QUOTE=Hart_Rod; Hey David, how about a whole 2WD blazer project? The tub is nearly rust free....

.

Your killing me!

I'm sure its well worthy of the asking price...

I only need a drivers side panel but, you never know. Keep it inside and we can keep our options open - thanks

**D.PASSMORE** · 04-19-2010, 08:03 PM

Quote:

Originally Posted by 67/72junkie

I have very nice rust free blazer side.Has 1 small quarter size ding on rear corner.I also have new stud welder so I can pull the ding out.$350 if interested I can take pics .

I'll Pm you. Thanks

**D.PASSMORE** · 04-19-2010, 08:03 PM

Quote:

Originally Posted by pound41

A few weeks back Did you see the blazer complete back section tub and the front cowl windshield frame. Two seperate auctions It was a guy in FLA both parts on Ebay They looked pretty good to me from the pics. I thought about going after them but too far from FLA to VA. I don't think they sold

Missed that one...

meathead95 · 04-19-2010, 09:30 PM

Quote:

Originally Posted by pound41

A few weeks back Did you see the blazer complete back section tub and the front cowl windshield frame. Two seperate auctions It was a guy in FLA both parts on Ebay They looked pretty good to me from the pics. I thought about going after them but too far from FLA to VA. I don't think they sold

i bought both of them.

pound41 · 04-19-2010, 10:12 PM

Meathead was my assumption correct that they were good parts

meathead95 · 04-20-2010, 06:21 AM

they where both probably 7 or 8 out of 10 very useable.

**D.PASSMORE** · 04-20-2010, 09:20 AM

Quote:

Originally Posted by 67/72junkie

I have very nice rust free blazer side.Has 1 small quarter size ding on rear corner.I also have new stud welder so I can pull the ding out.$350 if interested I can take pics .

What part of NC are you located in?

*67/72junkie* · 04-20-2010, 12:53 PM

lower southeast corner.elizabethtown 28337 if coming from FL you will come up I-95 to lumberton about 20 miles for NC/SC border then 25 miles east on 41 to elizabethtown.

**D.PASSMORE** · 04-20-2010, 02:43 PM

Kool, My sister lives in Charlotte, buy I could take a little road trip.

*67/72junkie* · 04-28-2010, 08:54 PM

I got the blazer side out of the top of my mom's garage today.It was dark when I got home but I will take some pics first thing in the morning.Boy I have got to spend a couple days over there organizing things.So much stuff packed over there I can't even get around.Found a tilt and tach I had forgotten were there.

**D.PASSMORE** · 04-29-2010, 09:11 AM

Quote:

Originally Posted by 67/72junkie

I got the blazer side out of the top of my mom's garage today.It was dark when I got home but I will take some pics first thing in the morning.Boy I have got to spend a couple days over there organizing things.So much stuff packed over there I can't even get around.Found a tilt and tach I had forgotten were there.

I do know what you mean! thanks

**D.PASSMORE** · 05-05-2010, 08:11 AM

Quote:

Originally Posted by 67/72junkie

I have very nice rust free blazer side.Has 1 small quarter size ding on rear corner.I also have new stud welder so I can pull the ding out.$350 if interested I can take pics .

Any luck snapping a few quality photos? Very intrested. LMK, David

billsbowtie · 05-06-2010, 12:10 AM

david if you ever need a good pass. side bed side i have a nice one on a 72. would like to get $300.00 for it.

**D.PASSMORE** · 05-17-2010, 12:43 PM

Ttt

*67/72junkie* · 05-17-2010, 01:20 PM

David,have not forgotten you.I wanted to try out my new stud welder and the bedside had a few spots that where surface rusted from me running over with the da back when removed.I cleaned the surface rust off and pulled the ding I told you was on the rear corner.I like the studd welder works perfect.started raining and I stuck the bedside in back of truck under camper .still raining but as soon as it quits I will get you pics.it is cleaned up very good now so you can see exact condition without dirt,dust ,surface rust.

**D.PASSMORE** · 05-17-2010, 01:30 PM

Thats fine, just sent this back up to see if there are any others out there. Its good to have a plan B...

But, your still on the top of my list!

JimmyFloyd · 05-17-2010, 02:51 PM

I may be interested in any dave passes on. once I hear that he has found one, i'll make my own post.

crr26@cox.net · 05-22-2010, 12:59 AM

bills bowtie i might be interested in 72 pass bedside mine is toast. any chance for a couple of pics

swyfor5 · 05-22-2010, 10:34 PM

Put me inline next, pending some pic's. Could use a couple nice bedsides!

**D.PASSMORE** · 06-02-2010, 02:01 PM

Quote:

Originally Posted by 67/72junkie

David,have not forgotten you.I wanted to try out my new stud welder and the bedside had a few spots that where surface rusted from me running over with the da back when removed.I cleaned the surface rust off and pulled the ding I told you was on the rear corner.I like the studd welder works perfect.started raining and I stuck the bedside in back of truck under camper .still raining but as soon as it quits I will get you pics.it is cleaned up very good now so you can see exact condition without dirt,dust ,surface rust.

Hey Donald, just curious if was able to get the camara and take a few pictures. Let me know either way. Thanks David

04-19-2010, 09:43 AM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Blazer - drivers-side bedside Looking for a Blazer ~ drivers side bedside, nice condition. Will consider shipping if its a west coast part. Perfer east coast, I could pick up in the near future if someone is willing to hold after payment. I'll be in Arkansas in July and August. Let me know, Thanks David __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 04-19-2010 at 09:44 AM.

04-19-2010, 12:09 PM	#2
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Blazer - drivers-side bedside A few weeks back Did you see the blazer complete back section tub and the front cowl windshield frame. Two seperate auctions It was a guy in FLA both parts on Ebay They looked pretty good to me from the pics. I thought about going after them but too far from FLA to VA. I don't think they sold

04-19-2010, 01:11 PM	#3
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Blazer - drivers-side bedside I have very nice rust free blazer side.Has 1 small quarter size ding on rear corner.I also have new stud welder so I can pull the ding out.$350 if interested I can take pics .

04-19-2010, 05:23 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: Blazer - drivers-side bedside Hey David, how about a whole 2WD blazer project? The tub is nearly rust free..... http://67-72chevytrucks.com/vboard/s...d.php?t=390636 Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 04-19-2010 at 05:30 PM.

04-19-2010, 08:00 PM	#5
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Blazer - drivers-side bedside QUOTE=Hart_Rod; Hey David, how about a whole 2WD blazer project? The tub is nearly rust free..... Your killing me! I'm sure its well worthy of the asking price... I only need a drivers side panel but, you never know. Keep it inside and we can keep our options open - thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 04-19-2010 at 08:02 PM.

04-19-2010, 10:12 PM	#9
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Blazer - drivers-side bedside Meathead was my assumption correct that they were good parts

04-20-2010, 06:21 AM	#10
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Blazer - drivers-side bedside they where both probably 7 or 8 out of 10 very useable. __________________ 72 2wd blazer 72 swb 4x4

04-20-2010, 12:53 PM	#12
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Blazer - drivers-side bedside lower southeast corner.elizabethtown 28337 if coming from FL you will come up I-95 to lumberton about 20 miles for NC/SC border then 25 miles east on 41 to elizabethtown.

04-20-2010, 02:43 PM	#13
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Blazer - drivers-side bedside Kool, My sister lives in Charlotte, buy I could take a little road trip.

04-28-2010, 08:54 PM	#14
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Blazer - drivers-side bedside I got the blazer side out of the top of my mom's garage today.It was dark when I got home but I will take some pics first thing in the morning.Boy I have got to spend a couple days over there organizing things.So much stuff packed over there I can't even get around.Found a tilt and tach I had forgotten were there.

05-06-2010, 12:10 AM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Blazer - drivers-side bedside david if you ever need a good pass. side bed side i have a nice one on a 72. would like to get $300.00 for it. __________________ i have 67/72 chevy truck parts f/s.

05-17-2010, 12:43 PM	#18
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Blazer - drivers-side bedside Ttt

05-17-2010, 01:20 PM	#19
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: Blazer - drivers-side bedside David,have not forgotten you.I wanted to try out my new stud welder and the bedside had a few spots that where surface rusted from me running over with the da back when removed.I cleaned the surface rust off and pulled the ding I told you was on the rear corner.I like the studd welder works perfect.started raining and I stuck the bedside in back of truck under camper .still raining but as soon as it quits I will get you pics.it is cleaned up very good now so you can see exact condition without dirt,dust ,surface rust.

05-17-2010, 01:30 PM	#20
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Blazer - drivers-side bedside Thats fine, just sent this back up to see if there are any others out there. Its good to have a plan B... But, your still on the top of my list! __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

05-17-2010, 02:51 PM	#21
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Blazer - drivers-side bedside I may be interested in any dave passes on. once I hear that he has found one, i'll make my own post. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3



Register or Log In To remove these advertisements.

05-22-2010, 12:59 AM	#22
crr26@cox.net Registered User Join Date: Apr 2009 Location: abbeville louisiana Posts: 183	Re: Blazer - drivers-side bedside bills bowtie i might be interested in 72 pass bedside mine is toast. any chance for a couple of pics

05-22-2010, 10:34 PM	#23
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Blazer - drivers-side bedside Put me inline next, pending some pic's. Could use a couple nice bedsides!

Register or Log In To remove these advertisements.