CA 1968 Chevrolet Suburban rolling shell $200.00

[budnikguy]

OK, done parting her out... 1968 Suburban C10 stripped down to a shell with complete 6 lug drum brake suspension. Vin in place and glove box also, spid is worn and hard to read. Have completed lien sale paperwork, rust in the rockers and little on firewall around where the heater box was windshield frame looks great no rust/rot...very good starting point or excellent for the roof, quarters, or other patch panels you may need. Really do not have the time to cut myself, so, someone come and get her. Open to trade for parts also...

Adam
951-544-0721

[Hart_Rod]

Looks like a good start on a Crewcab for someone..... Did you send those lower moldings to Mar-K?

[budnikguy]

Rob, I was never contacted through my post or pm by them (Mar-K) I have them sitting in my garage though..saving them for them.

Originally Posted by Hart_Rod

Looks like a good start on a Crewcab for someone..... Did you send those lower moldings to Mar-K?

[Hart_Rod]

Originally Posted by budnikguy

Rob, I was never contacted through my post or pm by them (Mar-K) I have them sitting in my garage though..saving them for them.

Did you get the pm I sent you with their address?

[JimmyFloyd]

I'll pass this alongto the guy who bought my suburban. He might be interested in it.

[Hart_Rod]

I found the old PM:

"We could use the straight pieces from the doors back including the rear behind wheel well and in front of rear wheels. Don't need the rear fenders or the front doors but could use the rear door on the passenger side. I noticed from the thread that he was missing the short piece behind the 3rd door. Does he have that piece? Ship to: Mar-K c/o James McCormick
6625 West Wilshire Blvd. Oklahoma City, Oklahoma 73132" Mar-K

[budnikguy]

Yeah Rob I got it, sorry slow to respond to your post... I would like some contact from Mar-K/James before sending though...

Originally Posted by Hart_Rod

I found the old PM:

"We could use the straight pieces from the doors back including the rear behind wheel well and in front of rear wheels. Don't need the rear fenders or the front doors but could use the rear door on the passenger side. I noticed from the thread that he was missing the short piece behind the 3rd door. Does he have that piece? Ship to: Mar-K c/o James McCormick
6625 West Wilshire Blvd. Oklahoma City, Oklahoma 73132" Mar-K