|
06-06-2010, 07:32 PM
|
#5 |
|
Registered User
Join Date: Feb 2000
Location: Modesto, CA
Posts: 1,842
|
Re: Bigger Fuel Tank!
If you look at the pic you can see the two straps going under the tank. NWMP has welded "tabs" that hit the bottom of the frame. I cut these tabs off and welded new tabs lower down and shortened the straps to pull it up. I have a 3" body lift so I rased it about 2.5".
BTW ~ welding on the tank voids the warrenty..oh well it's made of steel and gonna last forever..longer than me hehehe I am running an external fuel pump mounted on the frame near the tank. The tank has 3 vent tubes that hook up to all the factory vent lines. I omited one vent and used it as a return line connection for my Edelbrock EFI.
__________________
1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks 
Last edited by Burt4x4; 06-06-2010 at 07:36 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode