transmission hump question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ECU PIRATE · 07-25-2010, 09:09 AM

I am moving ahead with the auto to manual swap. My question is about the tranny hump. Since I will be using a car tranny, will I have to cut my non removable hump and use a removable one? I might use a saginaw ( I know what the masses say ) any of you guys still running a 3 on the tree and how high is your hump?

Thanks,
Mike

**old Rusty C10** · 07-25-2010, 10:58 AM

with a three on the tree i did a cab swap and used a regular low hump cab and it was fine, so there should be no issue with the trans hump, although i did have to cut the hole for the clutch rod and the truck was a 1976

07-25-2010, 09:09 AM	#1
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	transmission hump question I am moving ahead with the auto to manual swap. My question is about the tranny hump. Since I will be using a car tranny, will I have to cut my non removable hump and use a removable one? I might use a saginaw ( I know what the masses say ) any of you guys still running a 3 on the tree and how high is your hump? Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

07-25-2010, 10:58 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: transmission hump question with a three on the tree i did a cab swap and used a regular low hump cab and it was fine, so there should be no issue with the trans hump, although i did have to cut the hole for the clutch rod and the truck was a 1976 __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.