header gasket? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

81ratrodc10 · 07-21-2010, 08:08 PM

i believe i have an exhuast leak from the header gasket so iv been lookinh on the web and have found several types i was wondering what you guys would recomend to use or what your using thanx

benoit454 · 07-21-2010, 08:15 PM

stock exhaust manifold gaskets if you are talking about the ones where the header bolts to the block, if not then aluminum or copper on the collectors since they are reuseable. They make the same ones for the block side but I found exhaust manifold gasket to work great, as long as they are the aluminum perferated looking ones.

81ratrodc10 · 07-21-2010, 08:17 PM

ya i actually am going to replace both but i was talking about the ones on the block

85burb · 07-21-2010, 08:35 PM

I have the dead soft ones they sell at pepboys. After you retighten them for about 3 weeks they are perfict. Have not messed with them in over a year. blew 3 sets out of the regular kind. The dead soft are like 50 bucks but 3 sets of the reg are like 60.

81ratrodc10 · 07-21-2010, 08:41 PM

we dont have a pep boys around here and advanced auto has been out for weeks so started looking online am going to try another place tommarrow but wanted to know what you guys were runin

85burb · 07-21-2010, 08:48 PM

autozone has some too. That is the only places i go due to location.

staggerd86c-10 · 07-21-2010, 09:26 PM

ok here is the trick, if you have aftermarket headers you can use the regular mr. gasket sets but use 2 on each side, sinch them down good and your problems should be good.

benoit454 · 07-21-2010, 09:34 PM

advance auto has an online store like autozone that you can pay shipping to your house r have it from the website to the store for pickup and avoid shipping, or at least they did, I know autozone still does. Then there's summit, jegs, and amazon.

I have the percy's dead soft alum. collectors, or seal 4 good they call em, comes with bolts and all I tightened them once and that was it, no leaks and no retorque.

82chevy350 · 07-21-2010, 09:34 PM

just get percys soft alluminum gaskets like 30 bucks from autozone no more worries

HOGDADDY · 07-24-2010, 01:08 PM

The gaskets that come with Thorly headers have never leaked not sure what kind they are though.

texasfunk · 07-24-2010, 02:04 PM

i've always just used stock manifold gaskets, neve ad a prop! and you dont have to take the header all the way to put them on, or replace them just in case something does happen.

KQQL IT · 07-24-2010, 02:33 PM

Quote:

Originally Posted by 82chevy350

just get percys soft alluminum gaskets like 30 bucks from autozone no more worries

X2. havnt touched mine in a year

3r!c84 · 07-24-2010, 05:02 PM

Quote:

Originally Posted by staggerd86c-10

ok here is the trick, if you have aftermarket headers you can use the regular mr. gasket sets but use 2 on each side, sinch them down good and your problems should be good.

X2 it works

copper ones suck! i got a set and they leaked like hell

GRX · 07-24-2010, 06:58 PM

In my experience the soft copper & aluminum gaskets work very well provided your headers' gasket area are flat. As I've seen with some of the cheaper headers the tube ends are simply sawed off = rough edge. In this case a pass on a belt sander does wonders.

82chevy350 · 07-24-2010, 08:34 PM

just get the dead soft aluminum ones and be done with it you can reuse them as many times as needed

Alex1 · 07-25-2010, 07:03 PM

RTV sealer works too.

81ratrodc10 · 07-26-2010, 07:17 PM

thanx guys for all the sugs i was away all weekend but maybe this week i can go get some

07-21-2010, 08:08 PM	#1
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	header gasket? i believe i have an exhuast leak from the header gasket so iv been lookinh on the web and have found several types i was wondering what you guys would recomend to use or what your using thanx __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

07-21-2010, 08:15 PM	#2
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: header gasket? stock exhaust manifold gaskets if you are talking about the ones where the header bolts to the block, if not then aluminum or copper on the collectors since they are reuseable. They make the same ones for the block side but I found exhaust manifold gasket to work great, as long as they are the aluminum perferated looking ones. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-21-2010, 08:17 PM	#3
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: header gasket? ya i actually am going to replace both but i was talking about the ones on the block __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

07-21-2010, 08:35 PM	#4
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: header gasket? I have the dead soft ones they sell at pepboys. After you retighten them for about 3 weeks they are perfict. Have not messed with them in over a year. blew 3 sets out of the regular kind. The dead soft are like 50 bucks but 3 sets of the reg are like 60. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-21-2010, 08:41 PM	#5
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: header gasket? we dont have a pep boys around here and advanced auto has been out for weeks so started looking online am going to try another place tommarrow but wanted to know what you guys were runin __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"

07-21-2010, 08:48 PM	#6
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: header gasket? autozone has some too. That is the only places i go due to location. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-21-2010, 09:26 PM	#7
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: header gasket? ok here is the trick, if you have aftermarket headers you can use the regular mr. gasket sets but use 2 on each side, sinch them down good and your problems should be good.

07-21-2010, 09:34 PM	#8
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: header gasket? advance auto has an online store like autozone that you can pay shipping to your house r have it from the website to the store for pickup and avoid shipping, or at least they did, I know autozone still does. Then there's summit, jegs, and amazon. I have the percy's dead soft alum. collectors, or seal 4 good they call em, comes with bolts and all I tightened them once and that was it, no leaks and no retorque. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-21-2010, 09:34 PM	#9
82chevy350 Registered User Join Date: Sep 2009 Location: Van Buren, AR Posts: 321	Re: header gasket? just get percys soft alluminum gaskets like 30 bucks from autozone no more worries __________________ Drive It Like Ya Stole It '82 Primer White c10 2wd LWB 350 sbc t350 (Hot Rod) '90 2wd LWB Silverado 350 tbi 700R4 (Daily Driver) '53 m38a1 Willys Jeep (Toy)

07-24-2010, 01:08 PM	#10
HOGDADDY Registered User Join Date: Jul 2006 Location: Alabama Posts: 662	Re: header gasket? The gaskets that come with Thorly headers have never leaked not sure what kind they are though.

07-24-2010, 02:04 PM	#11
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: header gasket? i've always just used stock manifold gaskets, neve ad a prop! and you dont have to take the header all the way to put them on, or replace them just in case something does happen. __________________ 2006 GMC Sierra CCSB, 6.0 swap 2000 Chevy C3500 Crew Cab shortbed dually 1999 Chevy c2500 Crew Cab shortbed 1982 El Camino 350/350 1979 K5 2wd blazer bagged/bodied 1986 Monte Carlo SS 1991 Chevy CK SWB-67 clip and tailgate, bagged 350/700r4 1955 Chevy Bel Air 2014 Chevy Silverado ccsb

07-24-2010, 06:58 PM	#14
GRX Registered User Join Date: Jul 2010 Location: MD Posts: 1,937	Re: header gasket? In my experience the soft copper & aluminum gaskets work very well provided your headers' gasket area are flat. As I've seen with some of the cheaper headers the tube ends are simply sawed off = rough edge. In this case a pass on a belt sander does wonders. __________________ 1969 c-10 Step Side Long Bed. I-6 250cid = = 1969 Pontiac GTO hard top. 400, 4-speed. Last edited by GRX; 07-24-2010 at 06:59 PM.

07-24-2010, 08:34 PM	#15
82chevy350 Registered User Join Date: Sep 2009 Location: Van Buren, AR Posts: 321	Re: header gasket? just get the dead soft aluminum ones and be done with it you can reuse them as many times as needed __________________ Drive It Like Ya Stole It '82 Primer White c10 2wd LWB 350 sbc t350 (Hot Rod) '90 2wd LWB Silverado 350 tbi 700R4 (Daily Driver) '53 m38a1 Willys Jeep (Toy)

07-25-2010, 07:03 PM	#16
Alex1 Registered User Join Date: Jul 2007 Location: Ottawa Ontario Canada Posts: 1,156	Re: header gasket? RTV sealer works too.

07-26-2010, 07:17 PM	#17
81ratrodc10 house of chevy's Join Date: May 2010 Location: New milford, CT Posts: 583	Re: header gasket? thanx guys for all the sugs i was away all weekend but maybe this week i can go get some __________________ 1987 m1028 cucv d30 2001 chevy s10 2000 honda shadow sabre 1100 "it's going to be an interesting ride home"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.