Drop Spindle Fitment Issue

[hoog]

Originally Posted by SCOTI

Doesn't require different arms..... The combination you have will work.

Originally Posted by lonestarluck

the only problem I ran into was wheel clearance with the right spindle so I ended up doing a very small amount of grinding

I think it is going to work. The UBJ I have now is for '73 - '86 as recommended from DJM. I still have a tiny bit of interference with the lip in the resting position, compression isn't a problem but she locks down pretty solid at full extension. Basically the truck would have to be airborne before I couldn't steer it.

Anyway it is much closer than before.