Need pic of seatbelt mounting holes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 06-05-2003, 10:37 PM

Could someone please post pic of where seatbelts mount? I need the are near the cab corners where the belt retractors mount. I replace my corners and don't have any bolt holes there.

FRENCHBLUE72 · 06-06-2003, 12:12 AM

If no one has posted a pic I will get you some friday .

cdowns · 06-06-2003, 02:44 AM

read the announcement at the top of the page

FRENCHBLUE72 · 06-06-2003, 07:33 AM

what announcement

JimKshortstep4x4 · 06-06-2003, 09:09 AM

Frenchblue72,

There is a temporary problem with attachments, so you can't attach pictures at this time.

Jim

On the seatbelt locations, if you look at the rear cab braces, you will notice a rounded area on the brace. This is where the square nut welds on for the seat belt and is in the right location for the retractor. The nut "centers on this area and once welded in place, you can drill the hole or you can spot the hole and drill through before welding the nut on.

Jim

Brad · 06-06-2003, 02:17 PM

Try doing a search under "seatbelts" or something similar. I'm sure you could find what you're looking for.

FRENCHBLUE72 · 06-06-2003, 07:59 PM

6 and 3/4 from rear cab wall and 1 and 13/16 from door weather striping channel

06-05-2003, 10:37 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Need pic of seatbelt mounting holes Could someone please post pic of where seatbelts mount? I need the are near the cab corners where the belt retractors mount. I replace my corners and don't have any bolt holes there. __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

06-06-2003, 12:12 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	If no one has posted a pic I will get you some friday . __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-06-2003, 02:44 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	read the announcement at the top of the page __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-06-2003, 07:33 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	what announcement __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-06-2003, 02:17 PM	#6
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Try doing a search under "seatbelts" or something similar. I'm sure you could find what you're looking for. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

06-06-2003, 09:09 AM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Frenchblue72, There is a temporary problem with attachments, so you can't attach pictures at this time. Jim On the seatbelt locations, if you look at the rear cab braces, you will notice a rounded area on the brace. This is where the square nut welds on for the seat belt and is in the right location for the retractor. The nut "centers on this area and once welded in place, you can drill the hole or you can spot the hole and drill through before welding the nut on. Jim

06-06-2003, 07:59 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	6 and 3/4 from rear cab wall and 1 and 13/16 from door weather striping channel __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.