Pre-fab front wheel tubs? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmag86 · 09-11-2010, 10:55 AM

Hey does anyone know where I can buy front wheel tubs for my bagged 86 c10? I've seen them made to order for the bed but not the front. Can you guys help me out? Thanks!
Posted via Mobile Device

BIG_BLAZER86 · 09-11-2010, 02:49 PM

Suicidedoors,has some.

mullit · 09-11-2010, 09:41 PM

trailer fenders

jmag86 · 09-13-2010, 11:02 AM

Thanks....I checked out the ones on ***************** but its hard to get a visual of what they look like installed. Does anyone here have a pic of some installed or a pic of the trailer fenders installed. And what's y'all opinion as far as looks.......which do y'all perfer?
Posted via Mobile Device

SCOTI · 09-13-2010, 11:50 AM

Quote:

Originally Posted by jmag86

Thanks....I checked out the ones on ***************** but its hard to get a visual of what they look like installed. Does anyone here have a pic of some installed or a pic of the trailer fenders installed. And what's y'all opinion as far as looks.......which do y'all perfer?
Posted via Mobile Device

Us? What do you prefer?

jmag86 · 09-13-2010, 06:57 PM

I don't know what I would perfer beings I have never had either one and only seen the trailer fenders once in a picture.......that's the whole reason I made this post. So like I said any pictures and info would be very helpful!!
Posted via Mobile Device

mullit · 09-13-2010, 09:53 PM

first picture is a first gen s 10 i did and the second is a dual axle fender cut in half on a colorado that im workin on. the round fenters are about $22 each and the dual about $60 . You can get em at pretty much any where trailers are sold or fixed

BIG_BLAZER86 · 09-14-2010, 12:11 AM

I was talking about the firewall tubs,.my BAD.

blazer2007 · 09-14-2010, 10:25 AM

I,ve been trying to decide myself which way to go but here are some pics I,ve saved

mullit · 09-14-2010, 07:34 PM

Quote:

Originally Posted by BIG_BLAZER86

I was talking about the firewall tubs,.my BAD.

Then get one of the round trailer fenders cut it in half put it in the fire wall cut off what you dont need of the tub half then patch the inner side, or the side closest to the center of the truck. hate to direct any one away from this site but check out s10forum.com tons of info on that site

jmag86 · 09-19-2010, 01:17 PM

Thanks for the help guys. Now what size would I need if I'm going to run 22's? I would assume a 8 or 9 inch wide but there different sizes in height and length as well, which I'm pretty sure y'all know. So what's best???
Posted via Mobile Device

texastrendz · 09-19-2010, 02:17 PM

this is how i built my inners for my dually project.....

09-11-2010, 10:55 AM	#1
jmag86 Registered User Join Date: Apr 2010 Location: Beaumont, Texas Posts: 136	Pre-fab front wheel tubs? Hey does anyone know where I can buy front wheel tubs for my bagged 86 c10? I've seen them made to order for the bed but not the front. Can you guys help me out? Thanks! Posted via Mobile Device

09-11-2010, 02:49 PM	#2
BIG_BLAZER86 Registered User Join Date: Mar 2004 Location: SWANTON OHIO Posts: 114	Re: Pre-fab front wheel tubs? Suicidedoors,has some. __________________ 81 blazer 2wd tukin 30's 07 Jeep Grand Cherokee on 26's Tube chassis 5.3,dual T cases,54" boggers,steering rocks Dodge 3500 with some mods

09-11-2010, 09:41 PM	#3
mullit Registered User Join Date: Jan 2007 Location: connecticut Posts: 127	Re: Pre-fab front wheel tubs? trailer fenders

09-13-2010, 11:02 AM	#4
jmag86 Registered User Join Date: Apr 2010 Location: Beaumont, Texas Posts: 136	Re: Pre-fab front wheel tubs? Thanks....I checked out the ones on ***************** but its hard to get a visual of what they look like installed. Does anyone here have a pic of some installed or a pic of the trailer fenders installed. And what's y'all opinion as far as looks.......which do y'all perfer? Posted via Mobile Device

09-13-2010, 06:57 PM	#6
jmag86 Registered User Join Date: Apr 2010 Location: Beaumont, Texas Posts: 136	Re: Pre-fab front wheel tubs? I don't know what I would perfer beings I have never had either one and only seen the trailer fenders once in a picture.......that's the whole reason I made this post. So like I said any pictures and info would be very helpful!! Posted via Mobile Device

09-13-2010, 09:53 PM	#7
mullit Registered User Join Date: Jan 2007 Location: connecticut Posts: 127	Re: Pre-fab front wheel tubs? first picture is a first gen s 10 i did and the second is a dual axle fender cut in half on a colorado that im workin on. the round fenters are about $22 each and the dual about $60 . You can get em at pretty much any where trailers are sold or fixed

09-14-2010, 12:11 AM	#8
BIG_BLAZER86 Registered User Join Date: Mar 2004 Location: SWANTON OHIO Posts: 114	Re: Pre-fab front wheel tubs? I was talking about the firewall tubs,.my BAD. __________________ 81 blazer 2wd tukin 30's 07 Jeep Grand Cherokee on 26's Tube chassis 5.3,dual T cases,54" boggers,steering rocks Dodge 3500 with some mods

09-14-2010, 10:25 AM	#9
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: Pre-fab front wheel tubs? I,ve been trying to decide myself which way to go but here are some pics I,ve saved Attached Images

09-19-2010, 01:17 PM	#11
jmag86 Registered User Join Date: Apr 2010 Location: Beaumont, Texas Posts: 136	Re: Pre-fab front wheel tubs? Thanks for the help guys. Now what size would I need if I'm going to run 22's? I would assume a 8 or 9 inch wide but there different sizes in height and length as well, which I'm pretty sure y'all know. So what's best??? Posted via Mobile Device

09-19-2010, 02:17 PM	#12
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Pre-fab front wheel tubs? this is how i built my inners for my dually project.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.