Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-20-2010, 09:48 PM | #1 |
Registered User
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,458
|
Nova subframe for '60-'62?
I know about the cross member conversion from the later trucks, but I just found a Nova subframe in a junkyard, so I'm wondering if there are any advantages to using it over the conversion crossmember.
I'm thinking it would get the truck down lower in the front, and a lot more stuff is available for the Nova/Camaro subframes than trucks. Thoughts? -Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School |
09-21-2010, 12:24 AM | #2 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Nova subframe for '60-'62?
I personally wouldn't put a Nova subframe under these trucks. It would be a lot of unnecessary work IMO. There is actually a lot of aftermarket support for the pickup suspensions anymore.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
09-21-2010, 01:46 AM | #3 |
Registered User
Join Date: Jul 2005
Location: Spanaway, WA
Posts: 103
|
Re: Nova subframe for '60-'62?
I have a 60 with a Camaro clip. The clip doesn't go out far enough to mount the rad, rad support and bumper. Plus it is a lot wider at the front so you would have to fab front supports for said items. Also the steering box is on the opossite side of the frame rail so you have to either use some steering u joints and "bend" it around or figure out how to mount a trucks steering box. If I didn't buy it this way I would go with the cross member swap, plus I'm not all that good at welding fabbing. I don't have pics other than my cell phone and I am not sure if those will even post. The swap has been done I know another guy on here did it and has the front end complete, so it falls mostly on your choice of money, fab skills, and time to do either one. Good luck with it.
Posted via Mobile Device |
09-21-2010, 03:57 AM | #4 |
Registered User
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,458
|
Re: Nova subframe for '60-'62?
Thanks guys.
I'm sticking with the later truck front crossmember/coil spring conversion. -Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School |
09-21-2010, 09:42 AM | #5 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,150
|
Re: Nova subframe for '60-'62?
Good idear ...
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
09-21-2010, 04:46 PM | #6 | |
Registered User
Join Date: Nov 2009
Location: Longview, Texas
Posts: 775
|
Re: Nova subframe for '60-'62?
Quote:
I used an 86 donor truck for my front and rear conversion. Worked perfect. |
|
Bookmarks |
|
|