Where does this connect to? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Born Lucky · 10-02-2010, 10:21 PM

Attachment 639294I started installing a new wiring harness. I replaced the taillight and the harness that runs along the frame. The harness that runs along the frame has an extra connection. One ends in the rear by the taillight and the other ends by the firewall ( photo) Where does that connect to?
I am thinking that it is for the back-up lights, but I am confused where the connector reaches the firewall. One connects into the stop=taillght harness and I can not find the connection for the one I assume was for the back-up lights. See photo.

**Captainfab** · 10-03-2010, 12:44 AM

If your truck didn't originally come with backup lights, the hole in the firewall may not have been punched out. I believe it should be right below the stop/taillight plug

Born Lucky · 10-03-2010, 08:38 AM

Quote:

Originally Posted by Captainfab

If your truck didn't originally come with backup lights, the hole in the firewall may not have been punched out. I believe it should be right below the stop/taillight plug

That is what I thought. I have the wiring diagram and it does not show where it connects to. Now if I punch a hole into the firewall where do I connect the wire.

**aerotruk63** · 10-03-2010, 06:39 PM

It would depend on whether you have a four speed,

automatic/ 3 speed in the tree, theres a switch that would be installed in the rectangular slot in the steering column between the clutch and brake pedals.

Born Lucky · 10-03-2010, 07:22 PM

Quote:

Originally Posted by aerotruk63

It would depend on whether you have a four speed,

automatic/ 3 speed in the tree, theres a switch that would be installed in the rectangular slot in the steering column between the clutch and brake pedals.

Yes I have a four speed, just like the example you provided.
I would need the bracket and the switch and harness inside the cab.
Where can I find,buy the parts? Thanks

**aerotruk63** · 10-03-2010, 07:27 PM

I would ask the guys on the forum if anyone has the pieces your looking for in a new thread. I have a used set for my project K10 as well as a NOS set in the for sale section.

10-02-2010, 10:21 PM	#1
Born Lucky Registered User Join Date: Mar 2010 Location: St Charles MO Posts: 481	Where does this connect to? Attachment 639294I started installing a new wiring harness. I replaced the taillight and the harness that runs along the frame. The harness that runs along the frame has an extra connection. One ends in the rear by the taillight and the other ends by the firewall ( photo) Where does that connect to? I am thinking that it is for the back-up lights, but I am confused where the connector reaches the firewall. One connects into the stop=taillght harness and I can not find the connection for the one I assume was for the back-up lights. See photo. Attached Images Last edited by Born Lucky; 10-02-2010 at 11:03 PM.

10-03-2010, 12:44 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Where does this connect to? If your truck didn't originally come with backup lights, the hole in the firewall may not have been punched out. I believe it should be right below the stop/taillight plug __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-03-2010, 06:39 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Where does this connect to? It would depend on whether you have a four speed, automatic/ 3 speed in the tree, theres a switch that would be installed in the rectangular slot in the steering column between the clutch and brake pedals. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-03-2010, 07:27 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Where does this connect to? I would ask the guys on the forum if anyone has the pieces your looking for in a new thread. I have a used set for my project K10 as well as a NOS set in the for sale section. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.