Pic of lower control arm please?

[Puglia10]

Looking for some pics of lower control arms, with close ups. My bumpstops are crushed so i was thinking of fabbing some new ones, think i could just make a box with a slit in it for the rubber? If anyone could take the time to measure it thatd be great too.

[gchemist]

I have tear down pictures.

[Puglia10]

thank you, i basically need a better pic of 043, with close ups and measurements to see if i can make my own if i cant find a used one, thanks anybody who can help! http://rides.webshots.com/photo/2278...54440533DkuUZZ

[N2TRUX]

Here's what we did on my stock arms.

[Puglia10]

bumping this as i need to make something very soon so i can get going on my project. ive searched and just cant find any good/close pics of the bumpstop/steering stop on the LCAs, someones gotta have them! Post up some pics of your stock LCAs or maybe even something you made work like N2TRUX so I can show my welder what I need, thanks!

[Puglia10]

this is the best i can find, which may have to do but if you have any better post them up please! thanks http://www.classictrucks.com/tech/10.../photo_07.html

[pig rig]

weld a piece of channle in and drill a hole for a urathen bolt in bump stop

[knightowl73]

no pics but im using factory 4wd front bumpstops in mine. just cut the factory mount off my a-arms and drilled a hole to mount the new one, its about as tall as the metal part that i cut off. freebie too on the bumpstops as i pocketed them from PnP

[Puglia10]

thanks guys

[Puglia10]

One more thing, what should I do for a steering stop? There was one on there right? Do I need one?
Posted via Mobile Device

[justpball]

if i am not mistaken they are on the spindle

[Puglia10]

hmm, can anyone confirm?

[mooseknuckles]

mine...cut off