dually rear springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GCncsuHD · 12-16-2010, 05:02 PM

Hmm, on this same note, anyone have a picture of their front springs on a K30 4x4? I'm trying to figure out if my front springs are sagging or if they are supposed to look the way they do. Currently they have a downward curve, I was thinking they should be pretty much flat without a load, but I still have about 2" to the bump stop.

I want the truck to sit level, and I can't decide between pulling a couple leaves from the rear, or lift springs in the front. I'm kind of leaning towards pulling leaves in the rear, because it will help the ride a little.

12-16-2010, 05:02 PM	#10
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: dually rear springs Hmm, on this same note, anyone have a picture of their front springs on a K30 4x4? I'm trying to figure out if my front springs are sagging or if they are supposed to look the way they do. Currently they have a downward curve, I was thinking they should be pretty much flat without a load, but I still have about 2" to the bump stop. I want the truck to sit level, and I can't decide between pulling a couple leaves from the rear, or lift springs in the front. I'm kind of leaning towards pulling leaves in the rear, because it will help the ride a little. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 12-16-2010 at 05:09 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.