|
12-05-2010, 11:26 PM
|
#1 |
|
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,449
|
Th-350 shifting
Hey I got a TH-350 with a B&M shift kit 2K stall it shifts real early from 1st to 2nd like around 1200RPM'S then it seems to hold in 2nd for a long time before it hit's second.This happens when I mash the gas ,it performs good when driving normal except it still shifts to early this has done it since I first got the trans.I have allso tried to adjust the vacum modulator but seems there is no improvement or change new modulator was installed and still no effect.Now I have turned the screw like a bazillon times each way in/out.How can I find out where this needs to be so I can start from scratch?What is causing the shifting problem? Thanks for the info
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
|
|
|
12-05-2010, 11:37 PM
|
#2 |
|
Registered User
Join Date: Nov 2010
Location: St. Louis Mo.
Posts: 282
|
Re: Th-350 shifting
sounds like a govenor issue...is this a rebuilt trans in stock aplication?
|
|
|
|
|
12-06-2010, 12:33 AM
|
#3 |
|
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,449
|
Re: Th-350 shifting
HHMMM NO it's in my 69 C-10 I don't think it has been rebuilt,the trans works great on a basic drive to the store and back or highway cruise except that it shifts to soon 1 to 2nd.But when I get on it it hangs in second to long before going into third.I was wondering if it could be the governor
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 Last edited by kaycee; 12-06-2010 at 12:37 AM. |
|
|
|
|
12-27-2010, 10:36 PM
|
#4 |
|
Registered User
Join Date: Jan 2008
Location: Chula Vista, Ca
Posts: 518
|
Re: Th-350 shifting
interested in what it is as well.
Last edited by orbot; 12-27-2010 at 10:39 PM. |
|
|
|
|
12-27-2010, 11:17 PM
|
#5 |
|
Registered Truck Offender
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
|
Re: Th-350 shifting
The modulator is only 1/2 of it. Adjust the kick down cable (check any chiltons for the proper adjustment) and if it still does an early 1-2,, then it's time to dig into the governor like mentioned
__________________
Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
