what transfer case will fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DetroitDan · 01-14-2011, 06:05 AM

maybe I'll lean toward a Gear Vendor then. I just hate the 3 speed. I think the 700 is ideal because of OD and a better 1st gear, as long as you can make it strong enough. I'm pretty hard on my vehicles. I'd like to have a 5 speed manual, but that's a whole nother can of worms. I've had sm465s before and wouldn't go in that direction.

I missed out on a used Gear Vendor a while back, found one on Craigslist for $1200, in an 86 3/4 ton with a 454. I could have parted the truck out and made more than enough to buy the parts to switch the GV from a 2wd th400 to a 205 case. That would have been ideal but somebody beat me to it.

I just want more gears and a little more gas mileage.

01-14-2011, 06:05 AM	#1
DetroitDan Registered User Join Date: Dec 2009 Location: Epping, NH Posts: 605	Re: what transfer case will fit? maybe I'll lean toward a Gear Vendor then. I just hate the 3 speed. I think the 700 is ideal because of OD and a better 1st gear, as long as you can make it strong enough. I'm pretty hard on my vehicles. I'd like to have a 5 speed manual, but that's a whole nother can of worms. I've had sm465s before and wouldn't go in that direction. I missed out on a used Gear Vendor a while back, found one on Craigslist for $1200, in an 86 3/4 ton with a 454. I could have parted the truck out and made more than enough to buy the parts to switch the GV from a 2wd th400 to a 205 case. That would have been ideal but somebody beat me to it. I just want more gears and a little more gas mileage. __________________ 1982 Chevy K30 CCLB fleetside. Formerly a cab and chassis, now a fleetside dually with the rear wheels tucked underneath. 454/th400/np205/C14/D60, 6/4 inch LIFT, not drop. Last edited by DetroitDan; 01-14-2011 at 06:06 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.