The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-13-2011, 09:25 PM   #1
283nova
Registered User
 
Join Date: Jan 2011
Location: post falls id
Posts: 81
transmission question

is it odd that a 60 gmc 1/2 ton fleet would have a 4 speed hydromatic tranmission behind the 305 v6? or is that just what they came with for an automatic?
283nova is offline   Reply With Quote
Old 01-13-2011, 09:29 PM   #2
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
Re: transmission question

that is what they came with from about 53 or 54-62. Same hydramatic as used in 54-56 olds and caddies.
why is it odd?
ron
padresag is offline   Reply With Quote
Old 01-13-2011, 09:46 PM   #3
kalirodding
CLASSIX Truck Club
 
kalirodding's Avatar
 
Join Date: Oct 2009
Location: Lodi Ca
Posts: 318
Re: transmission question

What 4 speed?
kalirodding is offline   Reply With Quote
Old 01-13-2011, 10:36 PM   #4
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
Re: transmission question

Quote:
Originally Posted by kalirodding View Post
What 4 speed?
what are you questioning
ron
padresag is offline   Reply With Quote
Old 01-13-2011, 11:34 PM   #5
283nova
Registered User
 
Join Date: Jan 2011
Location: post falls id
Posts: 81
Re: transmission question

was unsure, thought they had 3 speed hydromatics
283nova is offline   Reply With Quote
Old 01-13-2011, 11:53 PM   #6
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: transmission question

It isn’t “odd”, but it certainly is rare. Automatic transmissions in any of these trucks were rare, even more so with the GMC’s.

The 4 speed Hydramatic was also the basis for the famous B&M Hydro Stick racing transmission. They were industrial strength (and very heavy) and could be made to really slam into gear, and the first automatic transmission to be competitive against a stick shift. Here are a couple of comments from the B&M website:

“In the 50s it was B&M who came up with the idea of using a performance reinforced Hydramatic for racing”.

“B&M Automotive Products was founded by Bob Spar and Mort Schuman (B&M) in 1953. In 1955, Bob's brother Don went to work for B&M. Soon after, B&M produced the only patented 4-speed automatic racing transmission in history, known as the famous B&M Hydro Stick”.
markeb01 is offline   Reply With Quote
Old 01-14-2011, 01:13 AM   #7
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
Re: transmission question

they were not that rare. I just got rid of one a few months ago that I had.
ron
padresag is offline   Reply With Quote
Old 01-14-2011, 01:32 AM   #8
paul63c10
Registered User
 
Join Date: Jan 2011
Location: New Windsor, NY
Posts: 51
Re: transmission question

I have a jasper 350 sbc and a 2 speed powerglide behind that. what effects will that have on the 350 and original rear end? not to mention my daily driving habits?
paul63c10 is offline   Reply With Quote
Old 01-14-2011, 10:36 AM   #9
fleetsidelarry
Senior Car Nut
 
fleetsidelarry's Avatar
 
Join Date: Jan 2008
Location: shellman bluff, GA
Posts: 1,411
Re: transmission question

Quote:
Originally Posted by markeb01 View Post
“In the 50s it was B&M who came up with the idea of using a performance reinforced Hydramatic for racing”.
Markeb, there was an informative writeup in the Shopmanual section of the January, 2010 issue of Street Rodder magazine about these transmissions, in which, along with other information, similar statements were made. A reader responded (in the March issue) with the clarifying information that, in fact, a Cadillac Motors employee (Jack Leidgen, who had been involved with the development of the heavy-duty hydramatic tank transmission parts), was building racing hydramatics as early as 1950 and that, in 1951 (2 years before B&M), Cadillac published a spec sheet listing the parts that would be used to build a modified hydramatic and that these were the parts used (at least early on, I assume) by B&M.
__________________
Larry
fleetsidelarry is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:49 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com