turbocharged ebay truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

messed up c-10 · 06-28-2003, 11:54 PM

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2421253494
I've never seen one of our trucks with a turbo before.

Mike76251 · 06-29-2003, 12:14 AM

No wonder is has no miles...................
That is waay too much boost for street gas.
Cool engine though.

2tankin79 · 06-29-2003, 12:26 AM

one of those sit in the garage drink a few beers, look at the engine things?

*mike reeh* · 06-29-2003, 12:30 AM

sweet truck.

r0lf- · 06-29-2003, 01:09 AM

I thought carbs didnt like turbos?

ItsNotABlazer · 06-29-2003, 01:57 AM

Turbo Technology in WA had a shop truck back several years ago they did a twin turbo setup on I think (maybe it was a single) but it made close to 1000 hp and was a very easy driver the way they talked about it. http://www.turbotechnologyinc.com/ is their website in case anyone was interested. If I recall right the truck was a 76 short wide bed and was orange and tubbed rear end. I have the magazine around somewhere that had the article about it.

Brad

sbc350gearhead · 06-29-2003, 01:32 PM

That is one of the funkiest turbo setups I have ever seen. I wonder how it can flow fuel through the turbo without condensing on the tubes and impeller?

low 84 · 06-29-2003, 02:29 PM

Quote:

Originally posted by Mike76251
No wonder is has no miles...................
That is waay too much boost for street gas.
Cool engine though.

hes only runnin 8.2 cr and i'm sure he has a boost controller on it. probly turn it down to 10-15 lbs for stret driving. i bet its a blast to drive once that big arse turbo spools up though

*1FaastC10* · 06-29-2003, 02:44 PM

Quote:

Originally posted by sbc350gearhead
That is one of the funkiest turbo setups I have ever seen. I wonder how it can flow fuel through the turbo without condensing on the tubes and impeller?

that's easy. it doesnt flow fuel through the turbo. the fuel is put through the carb, and the tube from the turbo supplies compressed air. they both go down the intake to the cylinders.

Lil Greg · 06-29-2003, 06:32 PM

Anyone ever seen this one from Vortec for a carberated SBC looks like the carb sets in a box is so i guess you would'nt want any bowl leaks or vaccume leaks on you carb lol.

neonlarry · 06-29-2003, 06:46 PM

From reading that, I don't think he has ever run more that 14psi of boost. All he said, is that with 24psi desktop dyno said it would hmake that much power. Look at the exhaust routing too.

sbc350gearhead · 06-29-2003, 06:52 PM

The engine is not fuel injected but rather uses a draw thru system. The carb is a 1150 dominator worked for the system that then feeds fuel and air thru the turbo then back into the intake manifold.

I based my question off of that statement in the ebay ad. The guy may not know what he is talking about. How does a draw through carb meter fuel without vacuum?

houston6 · 06-29-2003, 07:44 PM

why?turbo uggh!i dont like it not pratical of course thats just me
is that hp rating accurate?

Cole's 87 · 06-29-2003, 07:53 PM

Pontiac used that sort of set up on their 80 or 81 turbo Trans Am with a 307cid it was a totally uprdictable set up. The way the adapter is set up when te air off the turbo goes threw the plate it causes vacume under the carb which pulls gas + air the only problem with the set up is when you let off the gas the boost has no where to go but back threw the carb which caused alot of fuel leaks. In a nut shell it was junk that is why vortec puts the whole carb in a box but the carb has to be reworked for that type of use.

*1FaastC10* · 06-29-2003, 10:09 PM

Mike, look at the exhaust end of the turbo. the pipe goes directly under the carb. the guy is full of it.

LOHRTBT · 06-29-2003, 11:54 PM

Good Idea..Poorly executed.

If I ever win the lotto...Im putting a Supra Motor and A fat Single turbo with a 6spd in the truck!! hahhaa
Like that will ever happen!

PHOENIX · 06-30-2003, 11:09 AM

Damn Cottonwood folk making us look bad

Where the hell is that turbo pipe going behind the carb?
Anyone shot him an email and asked for pictures behind the carb?

arveetek · 07-02-2003, 11:36 AM

Guys,

I've never seen a turbo setup up like this before. I'm getting ready to install a turbo on my diesel, so that's different, but all turbos are the same in this regard:

The suction side of the turbo is the center part facing the front of the engine. The output side of the boost is on the top. The exhaust is on the second turbine, towards the back of the motor. That means this particular setup in this truck is sucking air and fuel from beneath the carb, and then blowing it all back out of the turbo and back into the engine. I don't know where it is forcing it in at, perhaps in the rear of the intake manifold. I can't see where the pipe is connected to behind the carb.

I would imagine that the carb is setting on the air intake in a way that the fuel and air are bypassing the intake manifold, and rather is going directly into the turbo. The turbo is then forcing it back into the intake. It's setup just like a supercharger, with the blower between the intake manifold and carb. However, I didn't know a turbo could work that way.

06-28-2003, 11:54 PM	#1
messed up c-10 RHCP afficianado Join Date: Oct 2002 Location: McLoud, OK Posts: 789	turbocharged ebay truck http://cgi.ebay.com/ebaymotors/ws/eB...tem=2421253494 I've never seen one of our trucks with a turbo before. __________________ ~Ryan~ 89 S-10 Blazer with a 4.3L 96 Ford Crown Vic P71 4.6L V8. This car rocks. Here are some links to some good music. Jack Johnson Donavon Frankenreiter

06-29-2003, 01:09 AM	#5
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	I thought carbs didnt like turbos? __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

06-29-2003, 01:57 AM	#6
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Turbo Technology in WA had a shop truck back several years ago they did a twin turbo setup on I think (maybe it was a single) but it made close to 1000 hp and was a very easy driver the way they talked about it. http://www.turbotechnologyinc.com/ is their website in case anyone was interested. If I recall right the truck was a 76 short wide bed and was orange and tubbed rear end. I have the magazine around somewhere that had the article about it. Brad __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

06-29-2003, 06:46 PM	#11
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	From reading that, I don't think he has ever run more that 14psi of boost. All he said, is that with 24psi desktop dyno said it would hmake that much power. Look at the exhaust routing too. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

06-29-2003, 07:44 PM	#13
houston6 Registered User Join Date: May 2003 Location: north wilkesboro nc Posts: 221	why?turbo uggh!i dont like it not pratical of course thats just me is that hp rating accurate? __________________ Scott

06-29-2003, 12:14 AM	#2
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	No wonder is has no miles................... That is waay too much boost for street gas. Cool engine though.

06-29-2003, 12:26 AM	#3
2tankin79 Registered User Join Date: May 2003 Location: indiana Posts: 288	one of those sit in the garage drink a few beers, look at the engine things?

06-29-2003, 12:30 AM	#4
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 683	sweet truck.

06-29-2003, 01:32 PM	#7
sbc350gearhead Registered User Join Date: Mar 2003 Location: Columbus Ohio Posts: 1,413	That is one of the funkiest turbo setups I have ever seen. I wonder how it can flow fuel through the turbo without condensing on the tubes and impeller?

06-29-2003, 06:32 PM	#10
Lil Greg Registered User Join Date: Feb 2003 Location: Mansfield,Tx Posts: 54	Anyone ever seen this one from Vortec for a carberated SBC looks like the carb sets in a box is so i guess you would'nt want any bowl leaks or vaccume leaks on you carb lol.

06-29-2003, 06:52 PM	#12
sbc350gearhead Registered User Join Date: Mar 2003 Location: Columbus Ohio Posts: 1,413	The engine is not fuel injected but rather uses a draw thru system. The carb is a 1150 dominator worked for the system that then feeds fuel and air thru the turbo then back into the intake manifold. I based my question off of that statement in the ebay ad. The guy may not know what he is talking about. How does a draw through carb meter fuel without vacuum?

06-29-2003, 07:53 PM	#14
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	Pontiac used that sort of set up on their 80 or 81 turbo Trans Am with a 307cid it was a totally uprdictable set up. The way the adapter is set up when te air off the turbo goes threw the plate it causes vacume under the carb which pulls gas + air the only problem with the set up is when you let off the gas the boost has no where to go but back threw the carb which caused alot of fuel leaks. In a nut shell it was junk that is why vortec puts the whole carb in a box but the carb has to be reworked for that type of use.

06-29-2003, 10:09 PM	#15
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Mike, look at the exhaust end of the turbo. the pipe goes directly under the carb. the guy is full of it.

06-29-2003, 11:54 PM	#16
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Good Idea..Poorly executed. If I ever win the lotto...Im putting a Supra Motor and A fat Single turbo with a 6spd in the truck!! hahhaa Like that will ever happen! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

06-30-2003, 11:09 AM	#17
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Damn Cottonwood folk making us look bad Where the hell is that turbo pipe going behind the carb? Anyone shot him an email and asked for pictures behind the carb? __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *



Register or Log In To remove these advertisements.

07-02-2003, 11:36 AM	#18
arveetek Ultimate Diesel Dude Join Date: Oct 2002 Location: Southwest Missouri Posts: 328	Guys, I've never seen a turbo setup up like this before. I'm getting ready to install a turbo on my diesel, so that's different, but all turbos are the same in this regard: The suction side of the turbo is the center part facing the front of the engine. The output side of the boost is on the top. The exhaust is on the second turbine, towards the back of the motor. That means this particular setup in this truck is sucking air and fuel from beneath the carb, and then blowing it all back out of the turbo and back into the engine. I don't know where it is forcing it in at, perhaps in the rear of the intake manifold. I can't see where the pipe is connected to behind the carb. I would imagine that the carb is setting on the air intake in a way that the fuel and air are bypassing the intake manifold, and rather is going directly into the turbo. The turbo is then forcing it back into the intake. It's setup just like a supercharger, with the blower between the intake manifold and carb. However, I didn't know a turbo could work that way. __________________ Project truck: '81 C/20 converted to 6.2L TURBO DIESEL bored .040", gear drive, 6.5L injectors/pump, custom pistons, custom 4" exhaust, 700R4, 4.10's Daily Driver: '95 K1500 Tahoe, 6.5L TURBO DIESEL, NP241, 4L80E, 3.42's

Register or Log In To remove these advertisements.