1 piece glass - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thebabybrahma · 02-05-2011, 02:57 PM

does anyone make a replacement window glass that is 1 full piece to eliminate the vent windows for an 85 GMC? i have seen them for the 67-72 models, and they look great.

BLE 'BURBAN · 02-05-2011, 03:02 PM

www.onepieceproducts.com makes them and forum member/vendor here named CAPTAINKAOS sells them on his websight www.73-87chevytrucks.com

thesickc10 · 02-05-2011, 05:28 PM

Quote:

Originally Posted by BLE 'BURBAN

www.onepieceproducts.com makes them and forum member/vendor here named CAPTAINKAOS sells them on his websight www.73-87chevytrucks.com

700 bucks...ouch

Dalaigh · 02-05-2011, 05:55 PM

Quote:

Originally Posted by thesickc10

700 bucks...ouch

$700 for two windows isn't actually that bad, when you consider it's $400 for one replacement vent window from LMC. It would cost more to replace both vent windows and all the window tracks for both doors, then it would to put the one piece windows in. That of coarse is if you need to replace the vents, I do, that is why I'm considering the one piece windows, and even the rear glass they have.

muthstryker · 02-05-2011, 06:16 PM

Quote:

Originally Posted by Dalaigh

$700 for two windows isn't actually that bad, when you consider it's $400 for one replacement vent window from LMC. It would cost more to replace both vent windows and all the window tracks for both doors, then it would to put the one piece windows in. That of coarse is if you need to replace the vents, I do, that is why I'm considering the one piece windows, and even the rear glass they have.

x2, Exactly why im getting the one piece's.

thebabybrahma · 02-05-2011, 06:22 PM

I will wait until i get some other things done before i jump on the 1 piece windows. I really like the design and the fit. No more vent window noise

thesickc10 · 02-05-2011, 06:25 PM

Quote:

Originally Posted by Dalaigh

$700 for two windows isn't actually that bad, when you consider it's $400 for one replacement vent window from LMC. It would cost more to replace both vent windows and all the window tracks for both doors, then it would to put the one piece windows in. That of coarse is if you need to replace the vents, I do, that is why I'm considering the one piece windows, and even the rear glass they have.

touche...i was comparing to the last time ive bought a window it was 50 bucks from a junkyard. but yeah thats a good price then

**N2TRUX** · 02-05-2011, 06:25 PM

Quote:

Originally Posted by thesickc10

700 bucks...ouch

Seriously? Exactly how much would you expect t pay for a kit that includes two custom made windows, all the channel, brackets and etc to make them work. Oh yeah, and several thousands of dollars in R&D costs to get the kit to the market. The asking price of 700.00 isn't cheap, but I think it a dran good deal considering what is involved.

thebabybrahma · 02-05-2011, 07:16 PM

i agree - it is a good price, i would rather put the 700 into a drop of some kind and some wheels first and do windows later when paint time arrives

camshaftgsxr · 02-05-2011, 08:03 PM

next question, how is the quality?

87chevy.com · 02-05-2011, 08:30 PM

I recall the vent windows closer to 180-190 per side. As far as the quality, the pictures of the door window channel looks cheap and poo-ish... it gets glued on... i mean if you dont put your arm on it, it might not fall off... just my opinion on the pictures ive seen.
clint

HTX86chevy · 02-05-2011, 08:52 PM

what would happen in the event that a window gets broken? does some one offer just a replacement window with out the rest of the kit??? just curious

**Captkaos** · 02-09-2011, 11:40 PM

Quote:

Originally Posted by 87chevy.com

I recall the vent windows closer to 180-190 per side. As far as the quality, the pictures of the door window channel looks cheap and poo-ish... it gets glued on... i mean if you dont put your arm on it, it might not fall off... just my opinion on the pictures ive seen.
clint

May want to recheck your info, LMC has them for $400. When GM offered them, last one I sold was $380, and stopped buying them.

Replacements are available from OPP. No "glass" company will have them.

The scrapers on the 73-87's have clips on them as of the latest revision. They aren't glued on, so they aren't going to fall off.

02-05-2011, 02:57 PM	#1
thebabybrahma Registered User Join Date: Sep 2007 Location: Gray,Tennessee Posts: 182	1 piece glass does anyone make a replacement window glass that is 1 full piece to eliminate the vent windows for an 85 GMC? i have seen them for the 67-72 models, and they look great. __________________ '85 C-10, with 93 LT-1 & 4L60 1985 GMC, lookin' for its big block motor - SOLD '72 Chevy C-10 Cheyenne-SOLD

02-05-2011, 03:02 PM	#2
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: 1 piece glass www.onepieceproducts.com makes them and forum member/vendor here named CAPTAINKAOS sells them on his websight www.73-87chevytrucks.com __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

02-05-2011, 06:22 PM	#6
thebabybrahma Registered User Join Date: Sep 2007 Location: Gray,Tennessee Posts: 182	Re: 1 piece glass I will wait until i get some other things done before i jump on the 1 piece windows. I really like the design and the fit. No more vent window noise __________________ '85 C-10, with 93 LT-1 & 4L60 1985 GMC, lookin' for its big block motor - SOLD '72 Chevy C-10 Cheyenne-SOLD

02-05-2011, 07:16 PM	#9
thebabybrahma Registered User Join Date: Sep 2007 Location: Gray,Tennessee Posts: 182	Re: 1 piece glass i agree - it is a good price, i would rather put the 700 into a drop of some kind and some wheels first and do windows later when paint time arrives __________________ '85 C-10, with 93 LT-1 & 4L60 1985 GMC, lookin' for its big block motor - SOLD '72 Chevy C-10 Cheyenne-SOLD

02-05-2011, 08:03 PM	#10
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: 1 piece glass next question, how is the quality? __________________

02-05-2011, 08:30 PM	#11
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	Re: 1 piece glass I recall the vent windows closer to 180-190 per side. As far as the quality, the pictures of the door window channel looks cheap and poo-ish... it gets glued on... i mean if you dont put your arm on it, it might not fall off... just my opinion on the pictures ive seen. clint __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

02-05-2011, 08:52 PM	#12
HTX86chevy Registered User Join Date: Feb 2010 Location: Houston, Tx Posts: 349	Re: 1 piece glass what would happen in the event that a window gets broken? does some one offer just a replacement window with out the rest of the kit??? just curious __________________



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.