power steering hose question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

60apache · 02-10-2011, 06:51 PM

what do I do about the power steering hose the engine is ls1 the steering box is 1980 c10.

**Clyde65** · 02-10-2011, 07:11 PM

Look at this, it will help you

http://www.classictrucks.com/tech/09.../photo_18.html

60apache · 02-10-2011, 08:37 PM

that wont work with car accessories

68 c10 ls2 · 02-11-2011, 10:35 PM

Use the stock lines off your LS1 pump and the cut and reflare the lines with the ASE/ stock gear box fittings.

Cheyenne Supr · 02-11-2011, 10:43 PM

Mine were not stock hoses either. I had o-ring fittings on the box end and a flare fitting on the pump end. I never did figure out exactly what I had...none of the local auto parts suppliers could figure it out, and we searched through many hoses on their shelves trying to find a fit. I finally found a shop here locally that makes custom hydraulic hoses, mainly for tractors, and they made me a custom hose that was exactly what I needed.

Big Port Jimmy 6 · 02-11-2011, 10:52 PM

Pull the relief valve out of the original pump on the truck it should be a flare fitting. Install it in the new pump Use a stock 80 model pressure hose. Jay

60apache · 02-14-2011, 12:06 AM

Quote:

Originally Posted by Big Port Jimmy 6

Pull the relief valve out of the original pump on the truck it should be a flare fitting. Install it in the new pump Use a stock 80 model pressure hose. Jay

that would work great if I were using truck accessories! I have a camaro ps pump

02-10-2011, 06:51 PM	#1
60apache Registered User Join Date: Mar 2010 Location: brandon, ms Posts: 385	power steering hose question what do I do about the power steering hose the engine is ls1 the steering box is 1980 c10.

02-10-2011, 07:11 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: power steering hose question Look at this, it will help you http://www.classictrucks.com/tech/09.../photo_18.html __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-10-2011, 08:37 PM	#3
60apache Registered User Join Date: Mar 2010 Location: brandon, ms Posts: 385	Re: power steering hose question that wont work with car accessories

02-11-2011, 10:35 PM	#4
68 c10 ls2 Registered User Join Date: Mar 2010 Location: Minnesota Posts: 157	Re: power steering hose question Use the stock lines off your LS1 pump and the cut and reflare the lines with the ASE/ stock gear box fittings.

02-11-2011, 10:43 PM	#5
Cheyenne Supr Registered User Join Date: Dec 2003 Location: Nashville Posts: 48	Re: power steering hose question Mine were not stock hoses either. I had o-ring fittings on the box end and a flare fitting on the pump end. I never did figure out exactly what I had...none of the local auto parts suppliers could figure it out, and we searched through many hoses on their shelves trying to find a fit. I finally found a shop here locally that makes custom hydraulic hoses, mainly for tractors, and they made me a custom hose that was exactly what I needed. __________________ Larry 72 Cheyenne LWB Fleetside Oak Bed 350 w/ TH400 (finally complete!). 69 Chevy C-10 LWB 350 w/ TH350 (good 'ol rusty bullet proof dependable hauler). 02 Suburban Z71 4x4 (wife's driver).

02-11-2011, 10:52 PM	#6
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: power steering hose question Pull the relief valve out of the original pump on the truck it should be a flare fitting. Install it in the new pump Use a stock 80 model pressure hose. Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.