Stupid transmission question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregg72340 · 02-14-2011, 09:26 PM

This is probably a stupid question but does anyone know or can point me to a thread as to whats involved in replacing the front seal in a turbo 350

Thanks

**old Rusty C10** · 02-14-2011, 09:30 PM

dropping it or at least sliding it forward so that you can get the torque convertor out and then using a screwdriver popping out the old seal and using a hammer to set the new one, then put it all back

gregg72340 · 02-15-2011, 03:20 PM

Quote:

Originally Posted by old Rusty C10

dropping it or at least sliding it forward so that you can get the torque convertor out and then using a screwdriver popping out the old seal and using a hammer to set the new one, then put it all back

Ok Bob, you made that sound entirly too easy lol

Thanks

darush01 · 02-15-2011, 04:33 PM

Its not that bad but be careful when your putting the tranny back my dad list his 85 swb beautiful truck because he ket his buddy swap the trans and the idiot didnt slide the torque converter far enough back and blew the front seal out and set the truck on fire and now i have a chassis and a bed everything else was too far gone
Posted via Mobile Device

thesickc10 · 02-15-2011, 05:39 PM

when you have the trans bolted back to the engine make sure the converter will spin freely before bolting it back to the flywheel/flexplate. if it doesnt spin freely it isnt on right

terryj · 02-15-2011, 08:36 PM

When you take the seal out make sure you DO NOT score the seat, this will cause your seal to leak. When reinstalling the seal use a piece of soft wood to seat the seal or a rubber malet, this will lessen the chance of damaging the seal.

02-14-2011, 09:26 PM	#1
gregg72340 Registered User Join Date: May 2010 Location: ambler, pa Posts: 325	Stupid transmission question This is probably a stupid question but does anyone know or can point me to a thread as to whats involved in replacing the front seal in a turbo 350 Thanks __________________ Just would like the snow to stop so I can actually work on my truck!!!!!!!!!!!

02-14-2011, 09:30 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Stupid transmission question dropping it or at least sliding it forward so that you can get the torque convertor out and then using a screwdriver popping out the old seal and using a hammer to set the new one, then put it all back __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-15-2011, 04:33 PM	#4
darush01 Registered User Join Date: Feb 2010 Location: Louisville ky Posts: 398	Re: Stupid transmission question Its not that bad but be careful when your putting the tranny back my dad list his 85 swb beautiful truck because he ket his buddy swap the trans and the idiot didnt slide the torque converter far enough back and blew the front seal out and set the truck on fire and now i have a chassis and a bed everything else was too far gone Posted via Mobile Device

02-15-2011, 05:39 PM	#5
thesickc10 Registered User Join Date: Sep 2010 Location: New Hope, PA Posts: 279	Re: Stupid transmission question when you have the trans bolted back to the engine make sure the converter will spin freely before bolting it back to the flywheel/flexplate. if it doesnt spin freely it isnt on right __________________ 1985 c10 355 th350 (working on 4 speed conversion to super t10) 1979 camaro 358 super t10 2003 f250 superchip slp exhaust

02-15-2011, 08:36 PM	#6
terryj Registered User Join Date: Aug 2010 Location: Medford, Oregon Posts: 139	Re: Stupid transmission question When you take the seal out make sure you DO NOT score the seat, this will cause your seal to leak. When reinstalling the seal use a piece of soft wood to seat the seal or a rubber malet, this will lessen the chance of damaging the seal.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.