What did you get done 3/6/11 edition

[draggin86]

I undercoated my cab and installed it!

[355bullet]

damm!! truck is looking sweet!

[motornut]

drove two hours to check the trailer yup still fulla snow
apparently this dude can't read...

[motornut]

traffic was backed up quite a bit from "this"
It started to rain in the am Sat......rained all day.....garage got flooded in 2 inches(frost heave forcing water back towards house)
3am Sun looked out the window and saw 6 + inches of fresh snow and that then fell all day sunday
All that slush and snow then froze solid....and some still is.....warmer weather comin again tho

Lovein this Jimmy

[baclay9]

Got my BB put together.


By claypool782 at 2011-03-06

[UHcostUH]

put tires on the 4x4 in the the process of changing the motor bracketry and putting a stedside bed on.

[jrcaprai]

Originally Posted by baclay9

Got my BB put together.


By claypool782 at 2011-03-06

What are the Specs of it?

[jrcaprai]

Originally Posted by Altec

jrcaprai- Worried about that plug wire laying on the header?

That was before I put the MSD Pro-Clamp Wire Separators on

[bigblock73]

Got some 73 work done. Put Hushmat in the doors, installed the Autometer gauges in the modified bezel below the dash (trans temp and clock), and did some interior wiring. I also purchased a 50's cast iron 2' sheet metal brake (love it!) and helped a friend move 55 2x4's and 18 bundles of sheetrock...broke a rear brake line on his truck during the trip home from picking it all up...no brakes the last few miles, but it was a manual trans truck with a working emergency brake!