why is the brake warning light on? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jon Scully · 03-22-2011, 02:13 PM

Well A Couple of thank you's are in order!

To- Jaro-- Thanks for the info-- The prop valve was the issue!

To Rusty-- Thanks for the PIC-- I fabbed up a small tool to hold the valve down-- clamps etc were not effective-- and the tool worked great-- Looks nothing like the GM tool you pictured-- But mine gotthe job done!

Once the valve was set on there, and I acquired an assistant (at the rate of 2beers per hour), we had it complete and working great!

Thanks Again for all the assistance!
Jon

03-22-2011, 02:13 PM	#1
Jon Scully Registered User Join Date: Jan 2011 Location: Thunder Bay Ontario Posts: 97	Re: why is the brake warning light on? Well A Couple of thank you's are in order! To- Jaro-- Thanks for the info-- The prop valve was the issue! To Rusty-- Thanks for the PIC-- I fabbed up a small tool to hold the valve down-- clamps etc were not effective-- and the tool worked great-- Looks nothing like the GM tool you pictured-- But mine gotthe job done! Once the valve was set on there, and I acquired an assistant (at the rate of 2beers per hour), we had it complete and working great! Thanks Again for all the assistance! Jon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.