VA PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68jewel** · 03-13-2011, 07:02 PM

Quote:

Originally Posted by VA72C10

I am not sure. I'll check with a vendor to get the weight of a bedside and then use the size to figure up a cost...but I'm guessing at least 100-130 each bedside. Do you have a business address I could ship them to?

Yeah, I could have them shipped to my resto shop. I'll pm you also.

Rob68c10 · 03-13-2011, 09:58 PM

If that doesn't work out I may be interested. Depends on how bad my transmission costs me for my daily driver.

BTW I still have that radiator support for you VA72C10. I just haven't been able to get down your way.

VA72C10 · 03-14-2011, 01:01 AM

No problem, I'll let you know. Are you wanting just bedsides or the whole bed?

Rob68c10 · 03-14-2011, 01:22 AM

I would want the whole bed. But for right now this is almost just dreaming so if you can sell it go for it.

VA72C10 · 03-14-2011, 01:50 AM

I definitely prefer to sell it together...pm sent...

tampz67@yahoo.com · 03-15-2011, 12:28 AM

How much for the bed floor ship to 77520 also interested on the right hand side bed side but does it have the gas tank lid there?
Posted via Mobile Device

VA72C10 · 03-15-2011, 12:54 AM

I will look into shipping tomorrow...the floor is likely to be a couple hundred minimum though...and I'd have to spend a good amount boxing it up also....I'm going to try to sell it together or part out to people who can pick it up first...

VA72C10 · 03-17-2011, 03:33 AM

ttt...took the saddle tank doors off and it's clean inside too. So nice to just use an allan key and unscrew stuff and a screwdriver on 40 year old screws and they're not all rusted up

VA72C10 · 03-18-2011, 01:12 AM

ttt....took saddle tanks and doors off. Will post pics tomorrow but it looks really good inside and underneath.....someone wants this bed

VA72C10 · 03-19-2011, 07:48 AM

ttt

VA72C10 · 03-20-2011, 01:05 AM

ttt

VA72C10 · 03-20-2011, 01:20 PM

ttt

STOCKISH · 03-20-2011, 02:22 PM

Bump for a great seller, no suprises here!

jessewebb · 03-20-2011, 08:51 PM

I'd like to have the tailgate, If you decide to split it up.

VA72C10 · 03-21-2011, 11:47 PM

Quote:

Originally Posted by jessewebb

I'd like to have the tailgate, If you decide to split it up.

Leroy B-1 has first dibbs. I'll post pictures of it in a little while...

jessewebb · 03-22-2011, 06:26 AM

Thanks, don't forget me

VA72C10 · 03-22-2011, 02:02 PM

Here are the pictures of the tailgate

worst dent on top edge

bottom edge is clean of rust

There is a bow to the gate as I mentioned

Overall a very solid gate. Bow can be fixed and made into a very nice gate!

VA72C10 · 03-22-2011, 11:26 PM

ttt

VA72C10 · 03-23-2011, 11:29 PM

ttt

VA72C10 · 03-25-2011, 04:16 PM

have someone interested in this now...working on shipping quotes...

VA72C10 · 04-05-2011, 02:32 PM

SOLD locally!

03-13-2011, 09:58 PM	#27
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free If that doesn't work out I may be interested. Depends on how bad my transmission costs me for my daily driver. BTW I still have that radiator support for you VA72C10. I just haven't been able to get down your way.

03-14-2011, 01:01 AM	#28
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free No problem, I'll let you know. Are you wanting just bedsides or the whole bed? __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-14-2011, 01:22 AM	#29
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free I would want the whole bed. But for right now this is almost just dreaming so if you can sell it go for it.

03-14-2011, 01:50 AM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free I definitely prefer to sell it together...pm sent... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-15-2011, 12:28 AM	#31
tampz67@yahoo.com Registered User Join Date: Feb 2011 Location: baytown, tx Posts: 146	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free How much for the bed floor ship to 77520 also interested on the right hand side bed side but does it have the gas tank lid there? Posted via Mobile Device

03-15-2011, 12:54 AM	#32
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free I will look into shipping tomorrow...the floor is likely to be a couple hundred minimum though...and I'd have to spend a good amount boxing it up also....I'm going to try to sell it together or part out to people who can pick it up first... __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-17-2011, 03:33 AM	#33
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt...took the saddle tank doors off and it's clean inside too. So nice to just use an allan key and unscrew stuff and a screwdriver on 40 year old screws and they're not all rusted up __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-18-2011, 01:12 AM	#34
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt....took saddle tanks and doors off. Will post pics tomorrow but it looks really good inside and underneath.....someone wants this bed __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-19-2011, 07:48 AM	#35
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 01:05 AM	#36
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 01:20 PM	#37
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-20-2011, 02:22 PM	#38
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free Bump for a great seller, no suprises here! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-20-2011, 08:51 PM	#39
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free I'd like to have the tailgate, If you decide to split it up. __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

03-22-2011, 06:26 AM	#41
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free Thanks, don't forget me __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

03-22-2011, 02:02 PM	#42
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free Here are the pictures of the tailgate worst dent on top edge bottom edge is clean of rust There is a bow to the gate as I mentioned Overall a very solid gate. Bow can be fixed and made into a very nice gate! __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

03-22-2011, 11:26 PM	#43
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-23-2011, 11:29 PM	#44
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-25-2011, 04:16 PM	#45
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free have someone interested in this now...working on shipping quotes... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2011, 02:32 PM	#46
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: PRICE REDUCED!!! Fleetside short bed with steel floor almost rust free SOLD locally! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.