61 Apache Rear Sway bar help. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coastierider · 04-20-2011, 03:14 PM

Was wondering if I can put a rear sway bar on my truck, not sure how it would install, and where to put it, anyone have a rear sway bar setup on their truck?

http://www.classicperform.com/Store/...uck/CP7401.htm

**Clyde65** · 04-20-2011, 04:05 PM

They go on the trailing arms in front of the axle, at least the after market ones do.

http://www.performanceonline.com/196...BAR-KIT-16840/

61_FL_Apache · 04-20-2011, 04:09 PM

I have seen that before too. It has a curve in to to go over the pumpkin.

forestb · 04-20-2011, 04:54 PM

WARNING If it says 60-66 they will not work on your truck. The frame of the 60-62 is much wider than 63 and up. I ordered one from CPP and it was at least 6 inches to short in width. If you find one that says 60-62 with for coil springs I wold call to make sure first. And if you find one that works let me know because I have been looking all over for one.

coastierider · 04-20-2011, 05:02 PM

ok, thanks. i will measure the width and ask CPP what the width is on theirs.

04-20-2011, 03:14 PM	#1
coastierider Registered User Join Date: Mar 2011 Location: United States Posts: 23	61 Apache Rear Sway bar help. Was wondering if I can put a rear sway bar on my truck, not sure how it would install, and where to put it, anyone have a rear sway bar setup on their truck? http://www.classicperform.com/Store/...uck/CP7401.htm

04-20-2011, 04:05 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 61 Apache Rear Sway bar help. They go on the trailing arms in front of the axle, at least the after market ones do. http://www.performanceonline.com/196...BAR-KIT-16840/ __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-20-2011, 04:09 PM	#3
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: 61 Apache Rear Sway bar help. I have seen that before too. It has a curve in to to go over the pumpkin. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

04-20-2011, 04:54 PM	#4
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: 61 Apache Rear Sway bar help. WARNING If it says 60-66 they will not work on your truck. The frame of the 60-62 is much wider than 63 and up. I ordered one from CPP and it was at least 6 inches to short in width. If you find one that says 60-62 with for coil springs I wold call to make sure first. And if you find one that works let me know because I have been looking all over for one.

04-20-2011, 05:02 PM	#5
coastierider Registered User Join Date: Mar 2011 Location: United States Posts: 23	Re: 61 Apache Rear Sway bar help. ok, thanks. i will measure the width and ask CPP what the width is on theirs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.