How about some fancy fabrication pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1malo68 · 04-14-2011, 04:19 AM

Show us what you got!

rayfinseats · 04-14-2011, 09:23 AM

I bent each bar in a vice before welding them all together.

rayfinseats · 04-14-2011, 09:25 AM

Shifter I made from scratch with reverse lockout. I also fabbed a dash but no pictures yet.

johnnywagon · 04-20-2011, 03:17 PM

Transmission & transfer case cage.....overkill.

Tex_50613 · 04-20-2011, 05:45 PM

just check out my bumper threads, there are a couple.

silver7 · 04-20-2011, 09:22 PM

Homemade dual exhaust slots, cross member, dual shock brackets and traction bar mounts. I did the welding but my buddy Nick cut the steel for my dual exhaust set-up.

jbclassix · 04-20-2011, 10:48 PM

Yoke holding fixture. Works PERFECT!

Clutch alignment tool

All I can find for now... Don't have any pictures of my Dana housing spreader or tubing bender. Soon I will have some of my chassis mods and sheet metal mods hopefully...

1malo68 · 04-21-2011, 03:42 AM

I LOVE IT!!!! Those are some great ideas. It's amazing what a little imagination and a good welder can do! Keep 'em coming!

Burt4x4 · 04-21-2011, 10:02 AM

I made a few things over the years with my AC/DC Licoln Stick welder

Gas Tank Skidplate

Rock sliders in place of the rockers & Rear bumper and swing out tirecarrier

Powersteering reseviour bracket & Hydro clutch ressy bracket.

I stuffed AutoMeter guages into my guagecluster. Voided the warenty doing so as I had too remove the AutoMeter housings too getum mounted in but it worked! Greg72 did it first and I copied him.

Duno if this qualifys as fabrication but it takes alot of beer and a few friends too comeup with a campground paintjob like that! hahaha

Burt4x4 · 04-21-2011, 10:10 AM

Beer Made seat mounts!

Stick welders are messy but they penetrate with ease. That and you can weld the rusty stuff too.

Corbeau Baja RS

rayfinseats · 04-22-2011, 11:07 PM

http://67-72chevytrucks.com/gallery/...hp?photo=26279

Dash.

VegasBruce · 04-23-2011, 12:11 AM

1malo68 · 04-23-2011, 03:32 AM

Very nice!!!!................................... I'm gettin' ideas

orbot · 04-23-2011, 10:23 PM

Quote:

Originally Posted by VegasBruce

The floor looks great..

VegasBruce · 04-24-2011, 01:42 AM

Quote:

Originally Posted by orbot

The floor looks great..

Thanks

primer · 04-25-2011, 01:39 PM

Paging airspeed, report to fabrication thread. He's got some slick aluminum work.

04-14-2011, 04:19 AM	#1
1malo68 Registered User Join Date: Aug 2010 Location: Lost Wages, NV Posts: 201	How about some fancy fabrication pics Show us what you got! __________________ 1968 K10/30 *Frame Off Project "Overkill"* My 5 year, $30,000.00 toy

04-14-2011, 09:23 AM	#2
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: How about some fancy fabrication pics I bent each bar in a vice before welding them all together. Last edited by rayfinseats; 04-14-2011 at 09:27 AM.

04-14-2011, 09:25 AM	#3
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: How about some fancy fabrication pics Shifter I made from scratch with reverse lockout. I also fabbed a dash but no pictures yet. Last edited by rayfinseats; 04-14-2011 at 09:27 AM.

04-20-2011, 03:17 PM	#4
johnnywagon Sofa King. We, Todd, Ed. Join Date: Oct 2006 Location: Spokane, Wa. Posts: 631	Re: How about some fancy fabrication pics Transmission & transfer case cage.....overkill. Attached Images __________________ ~John 71 Blazer One Ton 65 Chevelle Station Wagon x2 59 Belair 2 Door 71 Chevy Open Road Van RV www.myspace.com/johnnywagon

04-20-2011, 05:45 PM	#5
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: How about some fancy fabrication pics just check out my bumper threads, there are a couple. __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own

04-20-2011, 09:22 PM	#6
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: How about some fancy fabrication pics Homemade dual exhaust slots, cross member, dual shock brackets and traction bar mounts. I did the welding but my buddy Nick cut the steel for my dual exhaust set-up. Attached Images __________________ Shawn 1971 C10 4x4 Last edited by silver7; 04-20-2011 at 09:28 PM.

04-20-2011, 10:48 PM	#7
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: How about some fancy fabrication pics Yoke holding fixture. Works PERFECT! Clutch alignment tool All I can find for now... Don't have any pictures of my Dana housing spreader or tubing bender. Soon I will have some of my chassis mods and sheet metal mods hopefully... __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

04-21-2011, 03:42 AM	#8
1malo68 Registered User Join Date: Aug 2010 Location: Lost Wages, NV Posts: 201	Re: How about some fancy fabrication pics I LOVE IT!!!! Those are some great ideas. It's amazing what a little imagination and a good welder can do! Keep 'em coming! __________________ 1968 K10/30 *Frame Off Project "Overkill"* My 5 year, $30,000.00 toy

04-21-2011, 10:02 AM	#9
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: How about some fancy fabrication pics I made a few things over the years with my AC/DC Licoln Stick welder Gas Tank Skidplate Rock sliders in place of the rockers & Rear bumper and swing out tirecarrier Powersteering reseviour bracket & Hydro clutch ressy bracket. I stuffed AutoMeter guages into my guagecluster. Voided the warenty doing so as I had too remove the AutoMeter housings too getum mounted in but it worked! Greg72 did it first and I copied him. Duno if this qualifys as fabrication but it takes alot of beer and a few friends too comeup with a campground paintjob like that! hahaha __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks Last edited by Burt4x4; 04-21-2011 at 10:11 AM.

04-21-2011, 10:10 AM	#10
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: How about some fancy fabrication pics Beer Made seat mounts! Stick welders are messy but they penetrate with ease. That and you can weld the rusty stuff too. Corbeau Baja RS __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

04-22-2011, 11:07 PM	#11
rayfinseats Registered User Join Date: Dec 2010 Location: sioux city, iowa Posts: 619	Re: How about some fancy fabrication pics http://67-72chevytrucks.com/gallery/...hp?photo=26279 Dash.

04-23-2011, 12:11 AM	#12
VegasBruce Registered User Join Date: Apr 2011 Location: Just outside Sin City Posts: 239	Re: How about some fancy fabrication pics __________________ Bruce 73 Stepside, 74 Blazer, 75 1 Ton, 66 Barracuda and a 05 Electraglide DD http://i56.photobucket.com/albums/g1...Rusti192-1.jpg

04-23-2011, 03:32 AM	#13
1malo68 Registered User Join Date: Aug 2010 Location: Lost Wages, NV Posts: 201	Re: How about some fancy fabrication pics Very nice!!!!................................... I'm gettin' ideas __________________ 1968 K10/30 *Frame Off Project "Overkill"* My 5 year, $30,000.00 toy

04-25-2011, 01:39 PM	#16
primer Registered User Join Date: Jun 2005 Location: McArthur CA Posts: 26	Re: How about some fancy fabrication pics Paging airspeed, report to fabrication thread. He's got some slick aluminum work.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.