i accomplish and steering column change

[Mr. 250r]

here is some pics of an 91 suburban column i also put an 88 in an 85 so i know those will work not sure how far the changes go back but there's two nuts holding it to dash *The ones pointing straight down not at an angle*, but first you must remove lower part of column, metal piece and air duct, next go to the 5 bolts on the inner firewall, two nuts on the outside firewall, shift linkage, 2 plastic inserts shaft. Drop column down and remove wiring which is 2 big plugins, a long skinny one, neutral safety switch, possibly a few more its been awhile but its really easy