will 3/5 CPP drop kit work for me? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 lover · 04-26-2011, 09:57 AM

Can anyone tell me if aCPP 3/5 drop kit will work on a 1968 without doing any other modifications? What about C notch I keep hearing about? Truck has front disc and rear drum. thanks

19seventeeCustom · 04-26-2011, 10:00 AM

kit should work just fine, no c-notch needed with a 5" drop. There are a lot of members running that same exact drop with no problems.

OJ1988 · 04-26-2011, 10:12 AM

I recently installed the 3" front, replacing my cut stockers. It actually raised mine some. It looks low and is almost touching the bumpstops on my lower a arms, which are off a 1975.
I am probably going to cut 1/2 coil off these to get the look I want.
Got to see the rears first.
I am in the process of swapping the 5" into the rear on mine as well. Replacing stockers that I assume were heated.
Looks like it will sit about the same in rear, which makes me think I may add a 1" block.
Posted via Mobile Device

OJ1988 · 04-26-2011, 10:20 AM

Edit! This is with stock cut fronts and heated rears. Stock 235/75/15 tires

Posted via Mobile Device

OJ1988 · 04-26-2011, 10:22 AM

With 3" ccp fronts and stock heated rears, With 235/60/17s

Posted via Mobile Device

**leddzepp** · 04-26-2011, 10:58 AM

you will not need a c-notch with a cpp 5" rear drop spring. i have cpp 5" rear springs, along with 1.5" blocks. i just finished installing a c-notch in mine, as it was needed at that point. you will have about 3" of clearance running just the drop springs. you will need to remove the factory bumpstops.
Posted via Mobile Device

67chevemall · 04-27-2011, 01:16 PM

ya the back is easy..no C notch is needed unless you want the frame on the ground........the front gets to be a headache with the drop spindle that has to have the disc brake upgrade. you can cut the spring down and run it...i did this for years but it wears out the outter inche of the tire.... If you want to put airbags you have to put in the 2.5 drop spindle and disc brakes....and then the stock rims don't fit so you need to get 18's or 20's.....seems to never end. Do it right the first time....get the front disc brake kit, and ball joints, tie rod ends if you need new ones....the 2.5 drop spindle, the rev 7 air bag kit from SDoors, and 20 inche rims....

04-26-2011, 09:57 AM	#1
68 lover Registered User Join Date: Mar 2011 Location: london on Posts: 5	will 3/5 CPP drop kit work for me? Can anyone tell me if aCPP 3/5 drop kit will work on a 1968 without doing any other modifications? What about C notch I keep hearing about? Truck has front disc and rear drum. thanks

04-26-2011, 10:00 AM	#2
19seventeeCustom Registered User Join Date: Mar 2010 Location: Downtown Posts: 573	Re: will 3/5 CPP drop kit work for me? kit should work just fine, no c-notch needed with a 5" drop. There are a lot of members running that same exact drop with no problems.

04-26-2011, 10:12 AM	#3
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: will 3/5 CPP drop kit work for me? I recently installed the 3" front, replacing my cut stockers. It actually raised mine some. It looks low and is almost touching the bumpstops on my lower a arms, which are off a 1975. I am probably going to cut 1/2 coil off these to get the look I want. Got to see the rears first. I am in the process of swapping the 5" into the rear on mine as well. Replacing stockers that I assume were heated. Looks like it will sit about the same in rear, which makes me think I may add a 1" block. Posted via Mobile Device __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig

04-26-2011, 10:20 AM	#4
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: will 3/5 CPP drop kit work for me? Edit! This is with stock cut fronts and heated rears. Stock 235/75/15 tires Posted via Mobile Device __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig Last edited by OJ1988; 04-26-2011 at 10:25 AM. Reason: Wrong info

04-26-2011, 10:22 AM	#5
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: will 3/5 CPP drop kit work for me? With 3" ccp fronts and stock heated rears, With 235/60/17s Posted via Mobile Device __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig Last edited by OJ1988; 04-26-2011 at 10:27 AM.

04-26-2011, 10:58 AM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: will 3/5 CPP drop kit work for me? you will not need a c-notch with a cpp 5" rear drop spring. i have cpp 5" rear springs, along with 1.5" blocks. i just finished installing a c-notch in mine, as it was needed at that point. you will have about 3" of clearance running just the drop springs. you will need to remove the factory bumpstops. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

04-27-2011, 01:16 PM	#7
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: will 3/5 CPP drop kit work for me? ya the back is easy..no C notch is needed unless you want the frame on the ground........the front gets to be a headache with the drop spindle that has to have the disc brake upgrade. you can cut the spring down and run it...i did this for years but it wears out the outter inche of the tire.... If you want to put airbags you have to put in the 2.5 drop spindle and disc brakes....and then the stock rims don't fit so you need to get 18's or 20's.....seems to never end. Do it right the first time....get the front disc brake kit, and ball joints, tie rod ends if you need new ones....the 2.5 drop spindle, the rev 7 air bag kit from SDoors, and 20 inche rims.... __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.