Headers for LS1? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shon · 02-01-2010, 09:05 PM

we use MSD wires ($75 shipped) and I am using the stock dipstick tube, just not running THRU the header tubes and I made a mounting bracket that attaches to the head and the dipstick. very simple.

I have another customer that did use the stock tube thru the headers but it took some effort.

having seen the work needed for the Pacesetters I like the DTs. I do not have a problem cutting frame but the denting of the tubes that have to be done turned me off.

But either way, I can ship you what ever you want.

Hard to see in this picture but the bracket I made is there and I am using BLACK MSD Fbody Wires.

nomrlz · 02-01-2010, 09:10 PM

coo! and thanks. hopefully we'll be able to buy a set before the price goes up

skoffice · 02-02-2010, 08:37 AM

Well I work at a shop building engines so we have Taylor wires by the roll, so I plan on just making my own length wires. As for the dipstick I have about 100 different ones lying around, I'm sure one will have to work out. I'm sorry that's probably not much help for most people

I have access to some pretty nice resources

Shon · 02-02-2010, 09:50 AM

Quote:

Originally Posted by skoffice

Well I work at a shop building engines so we have Taylor wires by the roll, so I plan on just making my own length wires.

Does Taylor offer the "bendable" boots like MSD has or is it just the 90* end?

skoffice · 02-04-2010, 05:37 AM

We have a bunch of different style boots from different brands

Aviat0r · 02-05-2010, 07:40 PM

Hi, I've put the Pace Setters in my '63 with a dropmember and they fit good. I've only got one spot to address and I think I can get it without pounding on the header tube. Got them from Summit and they matched the cheapest price I found online:

http://67-72chevytrucks.com/vboard/s...=324303&page=3

Av

Shon · 02-05-2010, 07:50 PM

Quote:

Originally Posted by Aviat0r

Got them from Summit and they matched the cheapest price I found online:

PLEASE support those vendors that support this great board.
I have some of the lowest prices on Pacesetter headers you will find anywhere and I ship for free. The prices you see is the price you pay.

Thanks!

**Hart_Rod** · 05-19-2010, 12:16 PM

Quote:

Originally Posted by Shon

we use MSD wires ($75 shipped) and I am using the stock dipstick tube, just not running THRU the header tubes and I made a mounting bracket that attaches to the head and the dipstick. very simple.

I have another customer that did use the stock tube thru the headers but it took some effort.

having seen the work needed for the Pacesetters I like the DTs. I do not have a problem cutting frame but the denting of the tubes that have to be done turned me off.

But either way, I can ship you what ever you want.

Hard to see in this picture but the bracket I made is there and I am using BLACK MSD Fbody Wires.

Apologies for bringing up an old thread. What is the part # on the MSD wires? I bought a set, MSD part # 32819, and they appear to be to short. Any suggestions,

R/

Shon · 05-19-2010, 01:12 PM

Quote:

Originally Posted by Hart_Rod

Apologies for bringing up an old thread. What is the part # on the MSD wires? I bought a set, MSD part # 32819, and they appear to be to short. Any suggestions,

R/

What coils do you have?
But you should be able to bend the plug side boot enough to reach the coils.

**Hart_Rod** · 05-19-2010, 01:16 PM

Quote:

Originally Posted by Shon

What coils do you have?
But you should be able to bend the plug side boot enough to reach the coils.

They are the factory truck coils (06 Tahoe). They are stretched so far, I don't think they will last. I'll snap a couple of pictures, but everyone else that I have seen that has these, don't look like a bungy cord....

.

Shon · 05-19-2010, 01:20 PM

Quote:

Originally Posted by Hart_Rod

They are the factory truck coils (06 Tahoe). They are stretched so far, I don't think they will last. I'll snap a couple of pictures, but everyone else that I have seen that has these, don't look like a bungy cord....

.

why did you not get 06 Tahoe wires???
Black 32823
Red 32829

$75 shipped.

**Hart_Rod** · 05-19-2010, 01:32 PM

Quote:

Originally Posted by Shon

why did you not get 06 Tahoe wires???
Black 32823
Red 32829

$75 shipped.

Stupidity I guess,

. I looked in the thread for the Thorley headers and could have swore that the Fbody wires were correct. Will you give me some trade on the Fbody wires?

Shon · 05-19-2010, 01:35 PM

Quote:

Originally Posted by Hart_Rod

Stupidity I guess,

. I looked in the thread for the Thorley headers and could have swore that the Fbody wires were correct. Will you give me some trade on the Fbody wires?

F-body wires work depending on the coils you have. some are flat and some are round.

Red or Black F-body wires?

**Hart_Rod** · 05-19-2010, 02:16 PM

Quote:

Originally Posted by Shon

F-body wires work depending on the coils you have. some are flat and some are round.

Red or Black F-body wires?

Red. 32819

Shon · 05-19-2010, 02:26 PM

Quote:

Originally Posted by Hart_Rod

Red. 32819

LOL
PM'd you.

bbc26 · 04-28-2011, 02:51 PM

I'm planning on carbing my 5.3 and relocating my coils and changing the valve covers. If I go with the Thorley headers what kind of problems do you guys see me running into with plug wires? Any suggestions?
Posted via Mobile Device

Shon · 04-28-2011, 09:06 PM

Quote:

Originally Posted by bbc26

I'm planning on carbing my 5.3 and relocating my coils and changing the valve covers. If I go with the Thorley headers what kind of problems do you guys see me running into with plug wires? Any suggestions?
Posted via Mobile Device

IF you know the lengths you want of each wire I can have a custom set made from MSD wire or you can make your own....

02-01-2010, 09:05 PM	#26
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: Headers for LS1? we use MSD wires ($75 shipped) and I am using the stock dipstick tube, just not running THRU the header tubes and I made a mounting bracket that attaches to the head and the dipstick. very simple. I have another customer that did use the stock tube thru the headers but it took some effort. having seen the work needed for the Pacesetters I like the DTs. I do not have a problem cutting frame but the denting of the tubes that have to be done turned me off. But either way, I can ship you what ever you want. Hard to see in this picture but the bracket I made is there and I am using BLACK MSD Fbody Wires. __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap Last edited by Shon; 02-01-2010 at 09:34 PM.

02-01-2010, 09:10 PM	#27
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: Headers for LS1? coo! and thanks. hopefully we'll be able to buy a set before the price goes up

02-02-2010, 08:37 AM	#28
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: Headers for LS1? Well I work at a shop building engines so we have Taylor wires by the roll, so I plan on just making my own length wires. As for the dipstick I have about 100 different ones lying around, I'm sure one will have to work out. I'm sorry that's probably not much help for most people I have access to some pretty nice resources __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

02-04-2010, 05:37 AM	#30
skoffice Registered User Join Date: Apr 2007 Location: Elk Grove, CA Posts: 375	Re: Headers for LS1? We have a bunch of different style boots from different brands __________________ 1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again)

02-05-2010, 07:40 PM	#31
Aviat0r Registered User Join Date: Jan 2008 Location: Arvada, CO Posts: 74	Re: Headers for LS1? Hi, I've put the Pace Setters in my '63 with a dropmember and they fit good. I've only got one spot to address and I think I can get it without pounding on the header tube. Got them from Summit and they matched the cheapest price I found online: http://67-72chevytrucks.com/vboard/s...=324303&page=3 Av

04-28-2011, 02:51 PM	#41
bbc26 Registered User Join Date: Jul 2009 Location: San Jacinto CA Posts: 21	Re: Headers for LS1? I'm planning on carbing my 5.3 and relocating my coils and changing the valve covers. If I go with the Thorley headers what kind of problems do you guys see me running into with plug wires? Any suggestions? Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.