|
05-23-2011, 04:08 PM
|
#1 |
|
Registered User
Join Date: Aug 2010
Location: New Hamburg, Ontario
Posts: 220
|
Upper control arms
got a pair of southern upper control arms. great shape. the ones on the truck are rotten to hell. unfortunatley to take the originals off i cannot just unbolt them, the threads are to rotten. and as i can see the bolts that hold the control arm its self are welded to the bracket which then bolts to the frame. is that bracket replaceable? the 4 bolts used to bolt the bracket to the frame can be replaced but am afraid the bracket its self may need to be replaced as well.
|
|
|
|
05-23-2011, 09:45 PM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,345
|
Re: Upper control arms
the bracket is replacable.. im not sure if its welded or riveted, but i had a similar situation and the shop i used (cause i wasnt attempting this on a gravel driveway) was able to get the bolts out and replace them without doing the bracket
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
05-24-2011, 01:09 PM
|
#3 |
|
Registered User
Join Date: Aug 2010
Location: New Hamburg, Ontario
Posts: 220
|
Re: Upper control arms
ok, i may use the torch to add a little heat to the nut to attempt to unbolt it
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
