bolt pattern help/question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68c20lwb · 05-01-2011, 08:37 PM

hello, i am looking at getting a set of summer rims for my 98 S10 and i am wondering if these suckers will fit?

http://minneapolis.craigslist.org/hn...356363666.html

thanks guys!!

ka_jd7and1 · 05-01-2011, 09:18 PM

Nope, S10s are 5 on 4 3/4". The big trucks (and some cars) were 5 on 5.

You need something off an S10, Camaro, or Monte Carlo, something like that.

cheford · 05-27-2011, 06:42 PM

Quote:

Originally Posted by ka_jd7and1

Nope, S10s are 5 on 4 3/4". The big trucks (and some cars) were 5 on 5.

You need something off an S10, Camaro, or Monte Carlo, something like that.

You wouldn't know what cars had the 5 on 5 bolt pattern would you. I'm looking for a set of axles I need to narrow a rear diff. The axles that I have from the pickup diff is under cut by the splines and can't be machined.
I was told the an 92 to 97 S10 zr2 had a 30 spline axle that is supposidly 1 1/4" shorter than the C/K series trucks, if this is so could they be drilled out to a 5 on 5 bolt pattern?

gchemist · 05-28-2011, 09:40 PM

Old Lincolns and Caddillacs had 5X5 and disc brake options. 94-96 SS cars also have 5X5 bolt patterns.

The ZR2 axel is wider than a standard S10. I'm not sure on the exact dimensions.

cheford · 05-29-2011, 07:41 PM

I just found out that the 1991 to 1996 Chev Caprice has a 10 bolt differenial that is 60.7 inch wide and has a 5 on 5" bolt pattern. Now I have to find one.

05-01-2011, 08:37 PM	#1
68c20lwb Registered User Join Date: Mar 2011 Location: Hankinson, ND Posts: 190	bolt pattern help/question hello, i am looking at getting a set of summer rims for my 98 S10 and i am wondering if these suckers will fit? http://minneapolis.craigslist.org/hn...356363666.html thanks guys!! __________________ 1968 C20 450hp 425ft-lbs 454/SM465 4.56's 2004 HD rims, needs paint and a 5th gear! 1969 C30 Open Road Motorhome 350/th400 1972 K10 350/350/205 Daily Driver -SOLD

05-01-2011, 09:18 PM	#2
ka_jd7and1 is a fungineer Join Date: Jan 2009 Location: Bakersfield, CA Posts: 795	Re: bolt pattern help/question Nope, S10s are 5 on 4 3/4". The big trucks (and some cars) were 5 on 5. You need something off an S10, Camaro, or Monte Carlo, something like that. __________________ 2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant

05-28-2011, 09:40 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: bolt pattern help/question Old Lincolns and Caddillacs had 5X5 and disc brake options. 94-96 SS cars also have 5X5 bolt patterns. The ZR2 axel is wider than a standard S10. I'm not sure on the exact dimensions. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-29-2011, 07:41 PM	#5
cheford Registered User Join Date: Apr 2007 Location: ontario Posts: 247	Re: bolt pattern help/question I just found out that the 1991 to 1996 Chev Caprice has a 10 bolt differenial that is 60.7 inch wide and has a 5 on 5" bolt pattern. Now I have to find one. Last edited by cheford; 05-29-2011 at 07:48 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.