Re: WTB_slide bar for AM FM radio
Another option is you can fix the original one that's broken, if the chrome isn't bad, or the new one that's broken.
This is done by drilling a very small hole in the broken area of the slide bar to about an 1/8" depth or a little more. Next, place the slide bar on the radio face with back side facing up, place the retainer in position on back side of face. Then, place some loctite on the threads of a very small phillips screw and thread it into the hole just drilled. DON'T OVER TIGHTEN. Check slide action. Takes about 1/2 hour.
Hope this helps.
|