mount location for computer and fuseblock - The 1947 - Present Chevrolet & GMC Truck Message Board Network

structures · 04-06-2011, 03:15 PM

I would like to get some ideas of where you guys are putting your computer and fuseblock. Would you post up some pics please?

**Clyde65** · 04-06-2011, 03:41 PM

Mine is the stock harness and it is on the DS inner fender. But if I had my choice, I would like the PCM in the cab and the fuse block on the PS firewall or inner fender.

RaceAGMC · 04-06-2011, 06:36 PM

I have a re-worked harness, my fuse block is under the dash, I made a mount. My computer will be on the firewall behind the intake manifold.

**TR65** · 04-06-2011, 09:18 PM

Quote:

Originally Posted by structures

I would like to get some ideas of where you guys are putting your computer and fuseblock. Would you post up some pics please?

Here is how I did mine. I wanted easy access. This is a daily driver. Not concerned about a "clean" engine compartment.

The fuse and relay box is a Texas highway patrol surplus from ebay. It had all the relays and plenty of fuses to hook everything up just like OE.

TR

67C10BUB · 04-07-2011, 05:40 AM

I just used the factory plastic bracket and bolted it to the LH fender.

BR3W CITY · 04-07-2011, 09:23 AM

Mine is being located on the DS inner fender well, up where the horn on my 66 is. I considered "tucking" them into the inner fender, but I feel the wiring is safer IN the engine bay rather than being exposed to the wheel opening.

structures · 04-07-2011, 04:43 PM

Guys thanks a lot I appreciate this and the links to your build threads.

TR I don't know what you consider clean but I think that looks pretty clean myself.

Clyde did you take any pics of your engine bay. I'm doing the stock harness rework myself, but I picked up a current performance fuse block to adapt.

**Clyde65** · 04-07-2011, 05:05 PM

yes, here ya go, now ya know what "not clean" is, right? this really doesnt show much, the computer was mounted with a stock tray and then bolted to the inner fender with rubber bushings for shock prevention or lessening rather.

structures · 04-07-2011, 07:26 PM

oh man clyde take it down it's awful!!!

dude that looks great I can't believe you're not happy with it.

**Clyde65** · 04-08-2011, 10:33 AM

I didnt have the time to "clean" it up when I had the old motor out. I would like to take the front sheet metal off and powdercoat the inner fenders and core support, and pain the firewall. but 1 thing at a time, and I dont have space for the job.

CamaroChris · 06-15-2011, 05:47 AM

I'm going to mount my PCm in the engine bay. Probably on the driver side fender. I'm just worried about water and mud, but i guess it comes like that factory :shrug:

BR3W CITY · 06-15-2011, 09:52 AM

Thats basically how I have mine. Water and mud shouldn't be much of a problem unless your off roading the thing. The PCM itself wouldn't care about the elements, as the the connections have the bolt-on water tight seal. Just make sure you isolate it (i used silicon pads) a bit from vibration.

Gordonr1973 · 06-16-2011, 10:22 PM

Quote:

Originally Posted by BR3W CITY

Thats basically how I have mine. Water and mud shouldn't be much of a problem unless your off roading the thing. The PCM itself wouldn't care about the elements, as the the connections have the bolt-on water tight seal. Just make sure you isolate it (i used silicon pads) a bit from vibration.

Looks good!!

usmcchevy · 06-16-2011, 10:37 PM

BR3W, Lookin' good man! I want that engine cover

04-06-2011, 03:15 PM	#1
structures Registered User Join Date: Nov 2009 Location: OK Posts: 274	mount location for computer and fuseblock I would like to get some ideas of where you guys are putting your computer and fuseblock. Would you post up some pics please? __________________ Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel

04-06-2011, 03:41 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: mount location for computer and fuseblock Mine is the stock harness and it is on the DS inner fender. But if I had my choice, I would like the PCM in the cab and the fuse block on the PS firewall or inner fender. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

04-06-2011, 06:36 PM	#3
RaceAGMC Registered User Join Date: Jul 2007 Location: Charlotte, NC Posts: 350	Re: mount location for computer and fuseblock I have a re-worked harness, my fuse block is under the dash, I made a mount. My computer will be on the firewall behind the intake manifold. __________________ 70 CST, 6.0/ 4L80E in the works. Custom harness by 68 Short Step

04-07-2011, 05:40 AM	#5
67C10BUB Registered User Join Date: Aug 2010 Location: Alta Loma, CA Posts: 610	Re: mount location for computer and fuseblock I just used the factory plastic bracket and bolted it to the LH fender. Attached Images __________________ 67 5.3L Build

04-07-2011, 09:23 AM	#6
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: mount location for computer and fuseblock Mine is being located on the DS inner fender well, up where the horn on my 66 is. I considered "tucking" them into the inner fender, but I feel the wiring is safer IN the engine bay rather than being exposed to the wheel opening. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

04-07-2011, 04:43 PM	#7
structures Registered User Join Date: Nov 2009 Location: OK Posts: 274	Re: mount location for computer and fuseblock Guys thanks a lot I appreciate this and the links to your build threads. TR I don't know what you consider clean but I think that looks pretty clean myself. Clyde did you take any pics of your engine bay. I'm doing the stock harness rework myself, but I picked up a current performance fuse block to adapt. __________________ Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel Last edited by structures; 04-07-2011 at 04:43 PM.

04-07-2011, 05:05 PM	#8
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: mount location for computer and fuseblock yes, here ya go, now ya know what "not clean" is, right? this really doesnt show much, the computer was mounted with a stock tray and then bolted to the inner fender with rubber bushings for shock prevention or lessening rather. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 04-07-2011 at 05:06 PM.

04-07-2011, 07:26 PM	#9
structures Registered User Join Date: Nov 2009 Location: OK Posts: 274	Re: mount location for computer and fuseblock oh man clyde take it down it's awful!!! dude that looks great I can't believe you're not happy with it. __________________ Robert 1965 Chevy C10 http://67-72chevytrucks.com/vboard/s...d.php?t=374373 1997 Chevy K2500 6.5 diesel

04-08-2011, 10:33 AM	#10
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: mount location for computer and fuseblock I didnt have the time to "clean" it up when I had the old motor out. I would like to take the front sheet metal off and powdercoat the inner fenders and core support, and pain the firewall. but 1 thing at a time, and I dont have space for the job. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

06-15-2011, 05:47 AM	#11
CamaroChris Registered User Join Date: Mar 2011 Location: Midvale, Utah Posts: 220	Re: mount location for computer and fuseblock I'm going to mount my PCm in the engine bay. Probably on the driver side fender. I'm just worried about water and mud, but i guess it comes like that factory :shrug:

06-15-2011, 09:52 AM	#12
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: mount location for computer and fuseblock Thats basically how I have mine. Water and mud shouldn't be much of a problem unless your off roading the thing. The PCM itself wouldn't care about the elements, as the the connections have the bolt-on water tight seal. Just make sure you isolate it (i used silicon pads) a bit from vibration. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

06-16-2011, 10:37 PM	#14
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: mount location for computer and fuseblock BR3W, Lookin' good man! I want that engine cover __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.