|
06-17-2011, 04:11 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: stafford,CT
Posts: 30
|
Harmonic balancer
Hi, i have a 1979 chevy inline 6. 250 ci. i recently did all new seals and gaskets in the motor and uppon taking the harmonic balancer off to do the front oil seal i discovered that the seal had warn a grove into the balancer. i went to the local napa and ordered a speedy sleve to fix the problem. to put the balancer back on the crank shaft i had to drive it on with a hammer because the crank is not drilled for a bolt. once i drove it on untill it stopped it had verry little clearance to the timing gear cover, and the belt didn't align properly. i am wondering if there is a certain spacing or if i just pull it out until it matches with the water pump pulley? any help would be great guys.
thanks, Ben |
|
|
|
06-17-2011, 09:23 PM
|
#2 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,280
|
Re: Harmonic balancer
You had the right idea pull it out to square it up with the w/p. Jim
|
|
|
|
|
06-21-2011, 06:56 PM
|
#3 |
|
Registered User
Join Date: May 2011
Location: stafford,CT
Posts: 30
|
Re: Harmonic balancer
i did exactly that . thanks
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
