|
07-31-2011, 12:17 AM
|
#1 |
|
Registered User
 
Join Date: Dec 2010
Location: Texas
Posts: 246
|
PWR STR hose ?
Need some help on running these power steering lines here are some pics of my set up, I do know the large 10an from remote resivoir goes to the 10an port on the pump, question is does anyone know where to run the others
Thanks |
|
|
|
07-31-2011, 01:34 AM
|
#2 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: PWR STR hose ?
It looks to me like you need a line from the reservior to the intake on the pump, Then another hose from the pressure side of the pump to the steering box, and then your return line goes from the steering box back to the other port on the reservior
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
07-31-2011, 01:40 AM
|
#3 | |
|
Registered User
Join Date: Dec 2010
Location: Texas
Posts: 246
|
Re: PWR STR hose ?
Quote:
|
|
|
|
|
|
07-31-2011, 02:47 AM
|
#4 |
|
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: PWR STR hose ?
Post 428 in my build shows how mine is done. I have a big feed line off the bottom of the resi going to the matching port on the pump then small line out to box. Im not sure if mine are in the right orientation but my pressure line goes to the furthest port and the return. Goes back to resi.
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
|
|
|
07-31-2011, 08:56 PM
|
#5 |
|
Senior Member
Join Date: Nov 2007
Location: Greenville, SC
Posts: 873
|
Re: PWR STR hose ?
Just to be clear.
The output of the pump (the small line) goes to the P/S box port closest to the frame. It has a bigger thread than the other port to prevent mix-up. This is the high pressure line, has to be special hose for the pressure. The other port from the P/S box is the return and goes to the small fitting on the reservoir. The big line from the reservoir is the pump suction line. TR
__________________
1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
