what is the thickness of the stock lower control arms? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camshaftgsxr · 07-31-2011, 09:05 PM

yep... read title, an estimate would be great

SCOTI · 07-31-2011, 09:44 PM

I measured some C30 arms & they were just shy of 1/4" @ .22. 1/2-ton uppers were just shy of 3/16". Both were measured @ the lower 'lip' of the control arm.

camshaftgsxr · 07-31-2011, 09:57 PM

so 3/16 would be a good estimate of c10 arms? (im honestly not familiar with the different ratings, 1/2 ton 3/4 ton and such in relation to c10 and c30 and so on, sorry)

SCOTI · 07-31-2011, 10:12 PM

Quote:

Originally Posted by camshaftgsxr

so 3/16 would be a good estimate of c10 arms? (im honestly not familiar with the different ratings, 1/2 ton 3/4 ton and such in relation to c10 and c30 and so on, sorry)

Yep. Plan on building your own?

camshaftgsxr · 07-31-2011, 10:37 PM

Quote:

Originally Posted by SCOTI

Yep. Plan on building your own?

no just modifying them... i have access to professional welders (the men and the machines) i just dont have any way to accurately measure the thickness and i figured it would be easy enough to ask,

thanks for the quick help!

07-31-2011, 09:05 PM	#1
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	what is the thickness of the stock lower control arms? yep... read title, an estimate would be great __________________

07-31-2011, 09:44 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: what is the thickness of the stock lower control arms? I measured some C30 arms & they were just shy of 1/4" @ .22. 1/2-ton uppers were just shy of 3/16". Both were measured @ the lower 'lip' of the control arm. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-31-2011, 09:57 PM	#3
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: what is the thickness of the stock lower control arms? so 3/16 would be a good estimate of c10 arms? (im honestly not familiar with the different ratings, 1/2 ton 3/4 ton and such in relation to c10 and c30 and so on, sorry) __________________



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.