Need seat measurments QUICK! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadchev72 · 08-12-2011, 11:22 PM

I need these quick if someone can, I am wanting to jump into this first thing in the morning.

Just bought some low back aftermarket seats for my Jimmy. I need to mount them up now and need some measurements since the factory seats are long gone. Here is what I am looking for in the red. Need a rough measurement from where the seat brackets bolt up to the top of the seat cushion.

I need front and back of the cushion measurments, so I can get the slant right.

**jaros44sr** · 08-13-2011, 12:07 AM

Do you think utility bucket seats would have the same demension?

bigbadchev72 · 08-13-2011, 12:27 AM

Should be fine, I just want them to feel close to factory when sitting in them.

VA72C10 · 08-13-2011, 12:39 AM

Taken from a 72 factory lowback bucket (on level ground not in the truck)

8" at the very back to the piping at the seam.
12 1/2" at the front to the piping at the seam. 13 1/4" to the highest part of the foam.

Where you have the lines drawn 10 back and 12 1/2 front...

**jaros44sr** · 08-13-2011, 10:52 AM

lookslike Va. beat me

bigbadchev72 · 08-13-2011, 11:29 AM

awesome, thanks guys. I will get some pics up later tonight

bigbadchev72 · 08-13-2011, 09:23 PM

08-12-2011, 11:22 PM	#1
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Need seat measurments QUICK! I need these quick if someone can, I am wanting to jump into this first thing in the morning. Just bought some low back aftermarket seats for my Jimmy. I need to mount them up now and need some measurements since the factory seats are long gone. Here is what I am looking for in the red. Need a rough measurement from where the seat brackets bolt up to the top of the seat cushion. I need front and back of the cushion measurments, so I can get the slant right. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

08-13-2011, 12:07 AM	#2
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Need seat measurments QUICK! Do you think utility bucket seats would have the same demension? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

08-13-2011, 12:27 AM	#3
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Need seat measurments QUICK! Should be fine, I just want them to feel close to factory when sitting in them. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

08-13-2011, 12:39 AM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need seat measurments QUICK! Taken from a 72 factory lowback bucket (on level ground not in the truck) 8" at the very back to the piping at the seam. 12 1/2" at the front to the piping at the seam. 13 1/4" to the highest part of the foam. Where you have the lines drawn 10 back and 12 1/2 front... __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-13-2011, 10:52 AM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Need seat measurments QUICK! lookslike Va. beat me __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

08-13-2011, 11:29 AM	#6
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Need seat measurments QUICK! awesome, thanks guys. I will get some pics up later tonight __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

08-13-2011, 09:23 PM	#7
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Need seat measurments QUICK! __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.