How much cut on bottom cup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 08-13-2011, 08:02 PM

I know on 67-72's the bottom cup can be 5/8 inches tall. What about on the 73-87's?

hotrodhomi · 08-13-2011, 08:14 PM

I have square body A arms on my blazer and I set the cup in the arm and measured how much I could cut off without rubbing.

mongoose · 08-13-2011, 08:19 PM

mine are 2 inches and they're close to the one side already. that's with 2600's something smaller you might be able to cut it some.

**lolife99** · 08-13-2011, 08:48 PM

I thought it was 1-5/8" total height.

5150 · 08-14-2011, 12:50 PM

The reason I ask, and I pretty much knew I screwed up, was that my dumba$$ cut the cup to a TOTAL of 5/8 inch not a 5/8 inch off the original cup.

hotrodhomi · 08-14-2011, 01:37 PM

no problem, it's just metal. You can weld it and cut it again. That's the beauty of metal. You can cut it three times and still be too short, but then you can weld it to make it longer.

jimmydean · 08-14-2011, 02:43 PM

Quote:

Originally Posted by hotrodhomi

no problem, it's just metal. You can weld it and cut it again. That's the beauty of metal. You can cut it three times and still be too short, but then you can weld it to make it longer.

Measure once, cut a couple times, weld on some more, then measure and cut it right?

Sounds like a long process, but it would work.

5150 · 08-14-2011, 05:37 PM

So have we decided on what Keith thinks, no shorter then 1 5/8? I can buy these:

http://*******************/bag-bracke...t-circle-lower

and just flip the other pieces over and weld them on. Just want to make sure the 1 5/8 is correct.

**lolife99** · 08-14-2011, 07:35 PM

Bryan.
Make a cardboard template.
Easy to cut with scissors and correct any errors.
Then you will know for sure.

5150 · 08-14-2011, 08:20 PM

I'm confused Keith, I just need to know the minimum height on the bottom cup.

**lolife99** · 08-14-2011, 08:31 PM

Cardboard circle.
(like a halo)
1-5/8" tall.
Make sure that is tall or short enough before you cut the actual cup.

gringoloco · 08-14-2011, 08:56 PM

1 5/8" in my experience, too. That said, I would use a template to be 100% sure...

5150 · 08-15-2011, 08:18 AM

Posted via Mobile Device

tcb-1 · 08-18-2011, 09:52 PM

1 5/8" here as well.

08-13-2011, 08:02 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	How much cut on bottom cup I know on 67-72's the bottom cup can be 5/8 inches tall. What about on the 73-87's? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-13-2011, 08:14 PM	#2
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: How much cut on bottom cup I have square body A arms on my blazer and I set the cup in the arm and measured how much I could cut off without rubbing. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

08-13-2011, 08:19 PM	#3
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: How much cut on bottom cup mine are 2 inches and they're close to the one side already. that's with 2600's something smaller you might be able to cut it some. __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

08-13-2011, 08:48 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: How much cut on bottom cup I thought it was 1-5/8" total height. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-14-2011, 12:50 PM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: How much cut on bottom cup The reason I ask, and I pretty much knew I screwed up, was that my dumba$$ cut the cup to a TOTAL of 5/8 inch not a 5/8 inch off the original cup. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-14-2011, 01:37 PM	#6
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: How much cut on bottom cup no problem, it's just metal. You can weld it and cut it again. That's the beauty of metal. You can cut it three times and still be too short, but then you can weld it to make it longer. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

08-14-2011, 05:37 PM	#8
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: How much cut on bottom cup So have we decided on what Keith thinks, no shorter then 1 5/8? I can buy these: http://*****************/bag-bracke...t-circle-lower and just flip the other pieces over and weld them on. Just want to make sure the 1 5/8 is correct. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb** for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-14-2011, 07:35 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: How much cut on bottom cup Bryan. Make a cardboard template. Easy to cut with scissors and correct any errors. Then you will know for sure. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-14-2011, 08:20 PM	#10
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: How much cut on bottom cup I'm confused Keith, I just need to know the minimum height on the bottom cup. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-14-2011, 08:31 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: How much cut on bottom cup Cardboard circle. (like a halo) 1-5/8" tall. Make sure that is tall or short enough before you cut the actual cup. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-14-2011, 08:56 PM	#12
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How much cut on bottom cup 1 5/8" in my experience, too. That said, I would use a template to be 100% sure... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

08-15-2011, 08:18 AM	#13
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: How much cut on bottom cup Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-18-2011, 09:52 PM	#14
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: How much cut on bottom cup 1 5/8" here as well. __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.