|
09-12-2011, 12:55 AM
|
#1 |
|
Registered User
Join Date: Sep 2008
Location: Creston, BC Canada
Posts: 369
|
S10 V8 Fan...
Getting all the parts together to finally get on with this build now that most of the dust has settled and I'm building my new shop.
Question is... I've dropped a 280ish HP SBC in this truck with an auto tranny and I'm running a 3 core aluminum rad with a tranny cooler (in front of) and an oil cooler that runs through the rad... Will a 16" electric fan be enough and is a shroud required? Any assistance is greatly appreciated! Cheers, Ted.
__________________
'51 Chevy Build - In the design stages Aut viam inveniam aut faciam - I will either find a way or make one. If you don't have time to do it right the first time, when will you... My new build - https://67-72chevytrucks.com/vboard/...70#post8958970 |
|
|
|
09-12-2011, 01:03 AM
|
#2 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: S10 V8 Fan...
See if you have room for a Taurus fan. They measure 22" x 18" x 6". the fan motor is off set from center so it gets past the pump.
|
|
|
|
|
09-12-2011, 06:47 AM
|
#3 |
|
Old Heap Driver
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,642
|
Re: S10 V8 Fan...
I'm running a 22X19 aluminum radiator (Speedway Motors), 16" pusher fan, mild SBC, TH-350, and have no cooling issues at all.
__________________
_____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
