IA Nice Suburban 4 Wheel Drive Frame (Roller) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 03-25-2011, 07:40 PM

-
I have a pretty nice 1972 Chevy/GMC Suburban 4x4 frame for sale. The only alteration is the hitch on the back. I think it would be easy to remove or replace it with a nice one. The frame was not cut. No rust out anywhere and the only scaley stuff is on the rear by the hitch. It still has the original undercoating in places. Not being a 4x4 guy I don’t have a clue what it has for the front or rear axles. The rear driveshaft is there. It has a mish-mash of wheels on it and it will be sold as a roller, just don’t know what it will have on it when it leaves here at this point in time. $300 picked up in Montezuma, Iowa. Post up any questions you have. I can also take pictures of specific areas if there is something you want to see close up. I'm pretty sure I have the parts to make this into a 4x4 pickup frame if you would want to....

As per board rules all replies in thread before any PM’s are sent.

LockDoc

Grimpala · 03-30-2011, 03:42 PM

If I can find a buddy to make a hotshot run with me I'll take it. Would you be willing to meet me in Osceola? I'm coming from Dallas, TX.

CORSAIR · 03-30-2011, 04:02 PM

Wouldn't happen to have a 16" x 6.5" 6 lug wheel on it by chance? looking for one.

Grimpala · 03-30-2011, 05:27 PM

Quote:

Originally Posted by CORSAIR

Wouldn't happen to have a 16" x 6.5" 6 lug wheel on it by chance? looking for one.

I've got a set of mid 90's Z-71 wheels just sitting around.

CORSAIR · 03-30-2011, 06:22 PM

Thanks but no thanks looking for just the one wheel to complete my set?

**LockDoc** · 03-31-2011, 12:26 AM

Quote:

Originally Posted by Grimpala

If I can find a buddy to make a hotshot run with me I'll take it. Would you be willing to meet me in Osceola? I'm coming from Dallas, TX.

Yes, I could meet you in Osceola. I would have to have a deposit on it to do that though. Too bad you weren't a week or two sooner. A friend of mine was just down there for the GoodGuys meet...

PM sent.

LockDoc

**LockDoc** · 03-31-2011, 12:33 AM

Quote:

Originally Posted by CORSAIR

Wouldn't happen to have a 16" x 6.5" 6 lug wheel on it by chance? looking for one.

Hi CORSAIR,

Can you post a picture of one of your wheels in this thread?

LockDoc

CORSAIR · 03-31-2011, 10:46 AM

Here you go

**LockDoc** · 03-31-2011, 10:53 AM

Quote:

Originally Posted by CORSAIR

Here you go

Thanks I will check.

LockDoc

**LockDoc** · 04-01-2011, 09:18 AM

Quote:

Originally Posted by CORSAIR

Wouldn't happen to have a 16" x 6.5" 6 lug wheel on it by chance? looking for one.

Looks like all of my wheels like that are 15"... It seems like I remember reading on here somewhere that the 16" ones are kind of rare.

LockDoc

CORSAIR · 04-01-2011, 10:42 AM

Yes they are rare I have three and searching for the HOLLY GRAIL Fourth one
Thanks for checking

chevytruckluver · 04-08-2011, 11:32 PM

do you know if the rear a posi?

**LockDoc** · 04-09-2011, 09:22 PM

Quote:

Originally Posted by chevytruckluver

do you know if the rear a posi?

Hi Trey,

No I don't. I'm not sure how you tell on the 4x4's. I couldn't find any numbers on it but I didn't try wire brushing it at all. I can look a little closer tomorrow.

LockDoc

**LockDoc** · 09-20-2011, 10:50 PM

-
This is still for sale...

LockDoc

03-25-2011, 07:40 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,090	Nice Suburban 4 Wheel Drive Frame (Roller) - I have a pretty nice 1972 Chevy/GMC Suburban 4x4 frame for sale. The only alteration is the hitch on the back. I think it would be easy to remove or replace it with a nice one. The frame was not cut. No rust out anywhere and the only scaley stuff is on the rear by the hitch. It still has the original undercoating in places. Not being a 4x4 guy I don’t have a clue what it has for the front or rear axles. The rear driveshaft is there. It has a mish-mash of wheels on it and it will be sold as a roller, just don’t know what it will have on it when it leaves here at this point in time. $300 picked up in Montezuma, Iowa. Post up any questions you have. I can also take pictures of specific areas if there is something you want to see close up. I'm pretty sure I have the parts to make this into a 4x4 pickup frame if you would want to.... As per board rules all replies in thread before any PM’s are sent. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 09-20-2011 at 10:49 PM.

03-30-2011, 03:42 PM	#2
Grimpala Registered User Join Date: Jan 2011 Location: Rockwall, TX Posts: 84	Re: Nice Suburban 4 Wheel Drive Frame (Roller) If I can find a buddy to make a hotshot run with me I'll take it. Would you be willing to meet me in Osceola? I'm coming from Dallas, TX.

03-30-2011, 04:02 PM	#3
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Nice Suburban 4 Wheel Drive Frame (Roller) Wouldn't happen to have a 16" x 6.5" 6 lug wheel on it by chance? looking for one. __________________ "The Can't Family Lives Across The Street"

03-30-2011, 06:22 PM	#5
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Nice Suburban 4 Wheel Drive Frame (Roller) Thanks but no thanks looking for just the one wheel to complete my set? __________________ "The Can't Family Lives Across The Street"

03-31-2011, 10:46 AM	#8
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Nice Suburban 4 Wheel Drive Frame (Roller) Here you go Attached Images __________________ "The Can't Family Lives Across The Street"

04-01-2011, 10:42 AM	#11
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Nice Suburban 4 Wheel Drive Frame (Roller) Yes they are rare I have three and searching for the HOLLY GRAIL Fourth one Thanks for checking __________________ "The Can't Family Lives Across The Street"

04-08-2011, 11:32 PM	#12
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Nice Suburban 4 Wheel Drive Frame (Roller) do you know if the rear a posi? __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

09-20-2011, 10:50 PM	#14
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,090	Re: Nice Suburban 4 Wheel Drive Frame (Roller) - This is still for sale... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.