fender extension seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rich 5150 69 · 09-28-2011, 06:49 PM

Anybody got pics of the fender extension seals in place....?

**rideblue00** · 09-28-2011, 08:50 PM

Are you talking about about the fender to cab? Like to protect the door from water and road debris?

Rich 5150 69 · 09-28-2011, 09:36 PM

correct..!

Slow Build · 09-29-2011, 12:15 AM

Is this what you need? This is probably original.
Just in case this is right I'll show a few angles.

brawley · 09-29-2011, 11:23 AM

I bought some repo seals like this- they stink and are too small- ended up making some out of sheetmetal and screwing them in place, now I actually have some protection.

**Clyde65** · 09-29-2011, 12:44 PM

They arent fun to replace, but not too awful bad. I uses some thick wire to attach them since the staples were toast.

Surfdaddy · 09-29-2011, 01:05 PM

I don't know how they got a stapler that big. Is it the same size staple they use on the front of the hood? I would think to repro that you could use heavy wire and a hammer/ dolly to get the same look.

**rideblue00** · 09-29-2011, 08:28 PM

These are not easy to find. I have been searching ebay for like 10 years for these and only 1 pair came up that i saw. And i didnt win them. Im still looking.

Rich 5150 69 · 09-29-2011, 09:20 PM

I know LMC sells them, but I think I will build them from aluminum, thanks for the pics guys they were a big help.!

63sbssbbw · 09-30-2011, 06:41 AM

There is also two smaller ones that attach to the little filler piece at the top rear of the fender (similar to door seal style).
T

slorio · 09-30-2011, 06:26 PM

Here's a post with picture for what I made the staples from:

http://67-72chevytrucks.com/vboard/s...57#post4310757

Hope this helps.
Regards,
Steve
New Orleans

09-28-2011, 06:49 PM	#1
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	fender extension seals Anybody got pics of the fender extension seals in place....? __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

09-28-2011, 08:50 PM	#2
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,866	Re: fender extension seals Are you talking about about the fender to cab? Like to protect the door from water and road debris?

09-28-2011, 09:36 PM	#3
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: fender extension seals correct..! __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

09-29-2011, 12:15 AM	#4
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: fender extension seals Is this what you need? This is probably original. Just in case this is right I'll show a few angles. Attached Images __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

09-29-2011, 11:23 AM	#5
brawley Easy Does It Join Date: Apr 2007 Location: Dirdy Mo , North Carolina Posts: 450	Re: fender extension seals I bought some repo seals like this- they stink and are too small- ended up making some out of sheetmetal and screwing them in place, now I actually have some protection.

09-29-2011, 12:44 PM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: fender extension seals They arent fun to replace, but not too awful bad. I uses some thick wire to attach them since the staples were toast. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-29-2011, 01:05 PM	#7
Surfdaddy Registered User Join Date: Jan 2011 Location: Newhall Ca. Posts: 463	Re: fender extension seals I don't know how they got a stapler that big. Is it the same size staple they use on the front of the hood? I would think to repro that you could use heavy wire and a hammer/ dolly to get the same look. __________________ 1961 GMC. Start date 1/20/2011 Past projects: 1958 Fleetliner 14ft Runabout 1966 Caprice 2dr 1970 VW Squareback

09-29-2011, 08:28 PM	#8
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,866	Re: fender extension seals These are not easy to find. I have been searching ebay for like 10 years for these and only 1 pair came up that i saw. And i didnt win them. Im still looking.

09-29-2011, 09:20 PM	#9
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: fender extension seals I know LMC sells them, but I think I will build them from aluminum, thanks for the pics guys they were a big help.! __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

09-30-2011, 06:41 AM	#10
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: fender extension seals There is also two smaller ones that attach to the little filler piece at the top rear of the fender (similar to door seal style). T __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)

09-30-2011, 06:26 PM	#11
slorio Registered User Join Date: Sep 2006 Location: Louisiana Posts: 375	Re: fender extension seals Here's a post with picture for what I made the staples from: http://67-72chevytrucks.com/vboard/s...57#post4310757 Hope this helps. Regards, Steve New Orleans



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.