Should this turn or move ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brad20653 · 08-16-2003, 05:15 PM

I can grab these and turn them in circles should it ??? The last i cant turn just wiggle around until bearing is in .

brad20653 · 08-16-2003, 05:15 PM

#2

brad20653 · 08-16-2003, 05:16 PM

#3

BobbyK · 08-17-2003, 12:57 AM

With the column disconnected from the streeing shaft and transmission shifter rod the outer tube will spin 360deg.The inside shaft will spin 360deg. as well.

I just had my steering column apart while I replaced the turnsignal cams and wiring.

08-16-2003, 05:15 PM	#1
brad20653 Senior Member Join Date: Jul 2003 Location: So. MD Posts: 218	Should this turn or move ? I can grab these and turn them in circles should it ??? The last i cant turn just wiggle around until bearing is in . Attached Images __________________ Soon to have 68 SWB 350 with Turbo350

08-17-2003, 12:57 AM	#4
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	With the column disconnected from the streeing shaft and transmission shifter rod the outer tube will spin 360deg.The inside shaft will spin 360deg. as well. I just had my steering column apart while I replaced the turnsignal cams and wiring. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

08-16-2003, 05:15 PM	#2
brad20653 Senior Member Join Date: Jul 2003 Location: So. MD Posts: 218	#2 Attached Images __________________ Soon to have 68 SWB 350 with Turbo350

08-16-2003, 05:16 PM	#3
brad20653 Senior Member Join Date: Jul 2003 Location: So. MD Posts: 218	#3 Attached Images __________________ Soon to have 68 SWB 350 with Turbo350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.