NJ Sheet metal, distributor

[MidLifer]

I picked up some leftover cab parts from another owner and am offering them here. All parts were purchased from Mill Supply. I would definitely prefer local pickup (Moorestown, NJ, zip 08057, close to Exit 4 on NJTP) but will ship as well. The boxes I have for these are trashed, so shipping costs may include new boxes (which I will try to scavenge or buy from the cheapest supplier). All prices are net of shipping.

Rocker panels and backing plates - $25/side or $40 for both sides SOLD

Floor pans - $30/side DRIVERS SIDE SOLD

Floor pan mounts - $10/pair SOLD

RH Cab corner - $20

If you want any combo of the above or the whole lot, make an offer.

Also I have a points-type distro with numbers to match a 71/72 pickup with 350 and manual trans (GM part number 1112046) listed on eBay -I will also sell it through this board if there are no bids yet - best offer:

http://cgi.ebay.com/ebaymotors/ws/eB...%3AMESELX%3AIT SOLD

[MidLifer]

Sorry, newbie seller - forgot to hit upload when i attached the pics:

[MidLifer]

Update - the distro now has a bid on it, so I have to sell it through eBay. Also forgot to mention all above prices are obo.

[darthwall]

what would be total price for drivers side floor and rockers to 98951

[MidLifer]

Do you want both rockers or just the driver side? Also, do you want the floor pan mounts?

[darthwall]

it would be both rockers my mounts are in decent condition so ill pass on those

[MidLifer]

Darthwall, it seems that the floor pan is going to be too expensive to ship - must be the size of it. Parcel Post for the rockers and backing panels will be $22, Fedex Ground $28. Since you want both sides, I'll knock $10 off the price, so it would be $62 with shipping (Parcel Post) or $68 Fedex.

When I calculated shipping for the floor pan, given a 30x30x12 box (which it would take to ship the piece) I got $105 in shipping charges. If anyone out there knows how to ship sheet metal of this size more cheaply, please chime in.

[darthwall]

I got some other sheet metal off this board couple weeks back from jerrasic5 you might want to pm him but he used usps and the floor panel was wrapped in cardboard not a box it was 25 to ship
Posted via Mobile Device

[joejbal]

I'm interested in the sheetmetal, located in wall nj 07719. How much for all of it?

[MidLifer]

If you are able to do local pickup, I will sell you the whole lot for $100. It's a 1 hour drive on 195/295 from you to me. Let me know.

[MidLifer]

Darthwall, based on the dimensions of the floor pan I cannot get it shipped for a reasonable price. The flange on the pan makes the box size too thick and sets off "dimensional weight". If you bought the other side from jurassic-1, that probably explains it, as that side has a smaller lip on it.

I'll still sell you the rockers if you want them. Let me know. Sorry about the delay.

[darthwall]

well lets try this I only need the first 6" in from the doors you could just cut it up for me and ship in the same box as the rockers its up to you I need cowel parts too so im going to be ordering them soon too if I can get a deal on here and help someone out great.

[MidLifer]

Darthwall, will it work if I send you the part on the left of the red line? This is about 8" from the edge. I can definitely fit that in a box with the rockers. Otherwise I can try to make a box that will get within USPS's limits for the whole pan.

[darthwall]

that will work for me if you can just cut the rest into strips and send them over

[MidLifer]

Sounds good. $70 for the parts and $30 for shipping. PM sent with Paypal instructions. Thanks.

[MidLifer]

Driver's side floor pan, and both rockers and backers sold to Darthwall. Thanks.

Still available:

Passenger side floor pan - $30

Floor pan mounts - $20 for all 4

Passenger Cab Corner - $20

See pics earlier in this thread.

[michael bustamante]

ALL FOUR CAB MOUNTS? (FLOOR MOUNTS) ARE THEY SLIP ON OR REPLACEMENTS? OH AND SHOIPPING TO nm 87121. THANKS MAN

[MidLifer]

I believe they are replacement. Like I said above, I got these from someone else, I'm not a body expert. The Mill Supply part numbers are:

50-60-70 (which I cannot find in the current catalog)

50-60-76 LH/RH (which Mill Supply says are "OEM", not "slip-on")

If you need the picture in higher res, PM me your e-mail address.

[michael bustamante]

LOOKS GOOD. HOW MUCH FOR SHIPPING TO NM 87121. i DONT KNOW IF THEYLL FIT IN A PRIORITY BOX OR NOT.

[MidLifer]

I tried but they are too long for a Priority Flat Rate Box. I can send them Parcel Post for $15. If you can Paypal me right away I can get them out tomorrow (Saturday) otherwise I won't be able to ship again til Friday.

PM sent with Paypal address.

[MidLifer]

ttt - I still have the cab corner and passenger floor pan available - best offer.