fs: dremel and torque wrenches

[67cst]

Hey guys just goin through some tools i dont use and i figure id sell some to get some extra bucks towards the truck, first off ive got a 3/8" torque wrench and a 1/2" torque wrench, both are brand new and made by husky, also i have a dremel that is brand new, still in box, it comes with the works, ( extention off dremel, small saw set up, lots of cut off and buffing bits etc..., flash light), i paid 160 for the dremel and 90 for the 3/8" wrench and 100 for the 1/2" wrench but im open to offers....



thanks,
Derek

[howlin50]

that is great stuff..ive got two dremels now, one battery powered for crawling around where the cords won't reach (like 10 acres out into a salvage yd) and one light duty 35,000 rpm one. sounds like yours is the pro carver model ...if you can figure out a price let me know. Like Josh, or one of the moderators said, we need to be careful about turning the board into an auction site Later, Mark H.

[67cst]

howlin50--check your mailbox

[SLS]

Are either of the torque wrenches INCH-POUNDS (not the typical FOOT-POUNDS) and of the 'beam' indicator variety (not the ratchet or dial type)?????


I need a 'beam' type in INCH-POUNDS...perferably 1/2 inch or 3/4 inch.

Thanks.

[67cst]

sorry, they are both foot pounds/newton-meters, and are the ratchet type...